Leviton Wireless Sensing Solution (WSC04/WSS10/WSS0S) — Product Brochure

Product brochure for Leviton's Wireless Sensing Solution — a completely self-powered, batteryless wireless occupancy sensing system for retrofit and new construction lighting control, built on EnOcean wireless technology.

How Installation Works — 1, 2, 3

1. Replace the existing wall switch with the Wireless Wall Switch Receiver (WSS10)
2. Mount the Wireless Occupancy Sensor to the ceiling
3. Installation complete

Why Go Wireless?

Lighting accounts for almost 50% of electricity use in commercial buildings, and traditional switches can't adjust to room occupancy — wasting energy and money. Leviton's Wireless Sensing Solution is the first completely self-powered wireless sensor system, combining occupancy sensing with self-powered/wireless technology developed and licensed from EnOcean, the worldwide leader in wireless control technology.

• Saves up to 75% in installation labor costs
• Complete projects in 1/4 the time of hardwire systems
• Perfect retrofit solution — no wires to run, no damage to walls/ceilings
• Ideal for hard-to-wire areas; sensors can be placed where needed

Leviton is part of the EnOcean Alliance, dedicated to advancing self-powered interoperable wireless building control systems.

Components

Wireless Infrared Occupancy Sensor (WSC04 / WSC15)

• Manual-ON/Auto-Off and Auto-ON/Auto-OFF modes
• Can be placed in locations difficult to hardwire, in both retrofit and new construction
• Self-powered — built-in solar cell draws on available ambient light, operating up to 48 hours without batteries/external power in Manual-ON/Auto-Off mode; three (3) AAA batteries required for Auto-ON operation
• Simple, fast installation with no additional wiring required
• Multiple model options for a variety of coverage patterns

Wireless Wall Switch Receiver (WSS10)

• Takes the place of traditional single-pole wall switches, fits in a standard single-gang wall box
• Provides local control and manual override
• Responds to signals from the occupancy sensor, automatically shutting off lights when the room is vacant
• Neutral and non-neutral models available
• 120-277 voltages, 50-60Hz; 1200VA (120V), 2700VA (277V)

Wireless Self-Powered Remote Switch (WSS0S)

• Provides remote local control and manual override
• Self-powered — draws on kinetic energy to charge itself each time the button is pushed
• Can be used for a convenient three-way switch solution
• Simple, fast installation with no additional wiring required

How It Works

Setup: Replace the existing electrical wall switch with the Wireless Wall Switch Receiver (operates like a standard switch, no additional wires required). Optionally set up the Wireless Self-Powered Remote Switch (operates remotely, no wiring). Fasten the Wireless Occupancy Sensor to ceiling or wall using mounting hardware or keyhole screws; pair devices via simple press-and-hold learning setup (multiple sensors can address the same switch).

Operation: The Wireless Wall Switch Receiver receives signals from the Occupancy Sensor and turns off lights when the room is unoccupied. Turning on the Wall Switch Receiver or Remote Switch activates the lights; once activated, the sensor is powered by available light via solar cells and reports when the room is vacant to send a "Lights OFF" signal. The Vacancy Confirmation Circuit automatically restores light — motion detection turns lights back on within 30 seconds of shutoff.

Applications

• Any Retrofit or New Construction Application
• Private and Executive Offices, Conference Rooms, Classrooms
• Gym/Fitness Facilities, Storage Areas, Multimedia Rooms
• Day Care Centers, Lounge and Lobby Areas, Restrooms

Ordering Information

* x = (W) White, (I) Ivory, (A) Almond, (T) Light Almond, (G) Gray, (E) Ebony

Leviton Manufacturing Co., Inc. · 59-25 Little Neck Parkway, Little Neck, NY 11362-2591 · Tech Line (8:30AM-7:30PM E.S.T. Mon-Fri): 1-800-824-3005 · www.leviton.com