Leviton QuickPort USOC Snap-In Connector (41106-R*6 / 41108-R*8) — Instructions

Instructions for use for the Leviton 41106-R*6 / 41108-R*8 QuickPort USOC Snap-In Connector — a telephone/voice jack connector featuring a wiring configuration label for quick and easy installation.

Description

Leviton's QuickPort USOC Snap-In Connectors feature a wiring configuration label directly on the jack for quick and easy wiring.

Installation

1. Remove the jacket from the cable.
2. Check the jack termination label (located on the sides of the jack) for the wiring standard and associated color codes. The label also includes the jack pin numbers.
3. Route the wires for termination as shown in the jack's included wiring diagrams.
4. Using a 110-style punchdown tool, seat the wires into the IDC slots. With the cutting edge of the tool facing outward, trim the excess wire flush with the jack body.
5. Place the cap over the termination wires for a secure connection and added strain relief.
6. Insert the jack assembly into the platform or wallplate, noting the "UP" position of the jack.

Note: The brown pair of the UTP cable is not used for this connector.

Important Instructions

• Read and understand all instructions. Follow all warnings and instructions marked on the product.
• Do not use this product near water — e.g., near a tub, wash basin, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
• Never push objects of any kind into this product through openings, as they may touch dangerous voltages.
• Save these instructions.

Safety Information

1. Never install communications wiring or components during a lightning storm.
2. Never install communications components in wet locations unless the components are specifically designed for wet-location use.
3. Never touch uninsulated wires or terminals unless the wiring has been disconnected at the network interface.
4. Use caution when installing or modifying communications wiring or components.
5. To prevent electrical shock, each opening must be filled with a module.

Manufacturer

Leviton Manufacturing Co., Inc., 2222 - 222nd Street SE, Bothell, WA 98021, USA · Phone: (425) 485-4288 · Fax: (425) 483-5270 · Doc: DI-C00-41106-00A