Leviton 47611-C6 Category 6 Board and Data Module — Installation Instructions

Installation instructions for Leviton's Category 6 Board and Data Module (Cat. No. 47611-C6 / 47611-C6B) — an expansion component used to add modular voice and data distribution capability to any Leviton Structured Media™ Center (SMC).

Installation

1. Align the mounting pins with the grid holes on the back of the enclosure. The module may be mounted horizontally or vertically. With the mounting pin plungers in the "out" position, press the unit into the grid in the desired location, then secure by pushing the plungers in.
2. Route and terminate up to six Category 6 cables from the wall jacks to the 4-Pair 110 IDC connectors lining the sides of the module, using an industry-standard punchdown tool. Each cable should be fully terminated (all 4 pairs) on one of the 110 IDC connectors.

Note: Wall outlets must be compliant with T568A wiring configuration.

Application

For data: Identify the cable you wish to activate and connect one end of a Category 6 patch cord into the corresponding module port and the other end into a Leviton switch or router.

Example: You have a computer and a printer in your home office, and want to access the printer from computers in two bedrooms:

• Route cables to the two office jacks (for the office computer and the printer) to corresponding 110 IDC connectors for Ports 1 & 2.
• Route cables to the bedroom jacks (for the 2 bedroom computers) to corresponding 110 IDC connectors for Ports 3 and 4.
• Install Category 6 patch cords from ports 1, 2, 3, and 4 on the module to ports on a Leviton switch or router. The 3 computers and the printer will now be networked (an optional print server will be required).

For voice: Connect a patch cord from a dial tone source, such as Leviton's Telephone Line Distribution Module, to the port on the Category 6 Board and Data Module that you wish to activate.

Note: The Category 6 Board and Data Module ports are 8-position, 8-conductor; however, they are designed to accommodate 6-position or 8-position patch cords.

T568A Wiring Color Code

Safety Information

• Read and understand all instructions. Follow all warnings and instructions marked on the product.
• Do not use this product near water (tub, wash basin, kitchen sink, laundry tub, wet basement, or swimming pool).
• Never push objects of any kind into this product through openings — they may touch dangerous voltages.
• Never install communications wiring or components during a lightning storm.
• Never install communications components in wet locations unless the components are designed specifically for such use.
• Never touch uninsulated wires or terminals unless the wiring has been disconnected at the network interface.
• Use caution when installing or modifying communications wiring or components.
• To prevent electrical shock, each opening must be filled with a module.
• SAVE THESE INSTRUCTIONS.

Limited 2-Year Warranty

Leviton warrants to the original consumer purchaser that this product is free of defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton's only obligation is to correct such defects by repair or replacement, at its option. This warranty excludes labor for removal or reinstallation, and is void if the product is installed improperly, overloaded, misused, opened, abused, or altered. There are no other express or implied warranties.

For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) · 1-800-405-5320 (Canada) · www.leviton.com