Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Leviton 41089-xxx — QuickPort Surface Mount Housing Instructions

    September 08, 2026 2 min read

    Installation instructions for Leviton QuickPort Surface Mount Housings (models 41089-xxx, 42036/42038/42046/42048-series).

    💾 Download Original PDF
    Full text manual (for reference)

    Installation instructions for Leviton QuickPort Surface Mount Housings (models 41089-xxx, 42036-IDA, 42038-IDB, 42046-IDA, 42048-IDB) — field-configurable surface-mount housings for QuickPort snap-in connectors and adapters.

    Overview

    Leviton's QuickPort Surface Mount Housings are field-configurable for most QuickPort snap-in connectors and adapters. The housing features port identification windows, and it can accept an optional security screw (not included) to prevent removal of the cover.

    Installation

    1. Note the port side and cable-entry side of the base. Use double-back tape, self-adhesive hook-and-loop strips, or the supplied 1" screws to mount the base to the wall.
    2. Terminate wire onto the QuickPort snap-in adapter or connector per that product's instructions.
    3. Insert the connector into the housing at a steep angle, rotate, and push the connector into the base.
    4. Swing the back part of the jack down and forward until it fully locks behind the retention ledge on the base.

    Removing the Jack

    Place a small flat screwdriver in the retention ledge slot on the base and pry upward to release.

    Important Safety Information

    • Read and understand all instructions. Follow all warnings and instructions marked on the product.
    • Do not use this product near water — e.g., near a tub, wash basin, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
    • Never push objects of any kind into this product through openings, as they may touch dangerous voltages.
    • Never install communications wiring or components during a lightning storm.
    • Never install communications components in wet locations unless designed specifically for use in wet locations.
    • Never touch uninsulated wires or terminals unless the wiring has been disconnected at the network interface.
    • Use caution when installing or modifying communications wiring or components.
    • Save these instructions.

    Manufacturer Contact

    Leviton Manufacturing Co., Inc. — 2222 - 222nd Street SE, Bothell, WA 98021, USA. Technical Support: 800-824-3005. Customer Service: 800-722-2082. International: 425-486-2222. Fax: 425-483-5270. Web: www.leviton.com