Leviton 1x4 Bridged Telephone Module (47609-004) — Installation Instructions

Description

The Leviton 1x4 Bridged Telephone Module features 5 sets of 110 IDC punchdowns. Any set can be used as the "input" set, bridging up to four lines of telephone service to the other four sets. UTP cable can be punched down on each of the four "output" sets to distribute service to remote locations throughout the house.

Installation

1. Snap the 1x4 Bridged Telephone Module into the mounting bracket (Cat. No. 47612-SBK, sold separately) and align the push-lock pins with the grid holes of the Structured Media Center (SMC).
2. The module may be mounted horizontally or vertically.
3. With the push-lock pins in the "out" position, press the unit into the grid at the desired location and secure by pushing the push-lock pins "in."

110 IDC Wiring Termination

Using an industry-standard punchdown tool, wire the 110 IDC connectors per the T568A wiring configuration. The wall jack should also comply with T568A wiring configuration.

Termination pairs (per T568A): White/Blue - Blue, White/Orange - Orange, White/Green - Green, White/Brown - Brown.

Important Safety Information

• Read and understand all instructions. Follow all warnings and instructions marked on the product.
• Do not use this product near water — e.g., near a tub, wash basin, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.
• Never push objects of any kind into this product through openings, as they may touch dangerous voltages.
• Never install communications wiring or components during a lightning storm.
• Never install communications components in wet locations unless the components are designed specifically for use in wet locations.
• Never touch uninsulated wires or terminals unless the wiring has been disconnected at the network interface.
• Use caution when installing or modifying communications wiring or components.
• To prevent electrical shock, each opening must be filled with a module.
• Save these instructions.

Warranty

Leviton warrants this product against defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton's only obligation is to repair or replace the product if returned prepaid with proof of purchase and a description of the problem. This warranty excludes labor for removal or reinstallation, and is void if the product is installed improperly, in an improper environment, overloaded, misused, opened, abused, or altered. There are no other express or implied warranties beyond what's stated, and Leviton is not liable for incidental, indirect, special, or consequential damages.

Leviton Manufacturing Co., Inc. — 59-25 Little Neck Parkway, Little Neck, NY 11362-2591, USA — Tech Support: 800-824-3005 — www.leviton.com — DI-212-47609-00A