Enbrighten 59339 In-Wall Add-On Rocker Switch — Specifications

Overview

The Enbrighten 59339 In-Wall Add-On Switch (Rocker) extends control of an existing Enbrighten Wi-Fi, Z-Wave, or Zigbee in-wall primary switch to additional switch locations in a 3-, 4-, 5-, or 6-way wiring configuration. It is not a stand-alone smart switch — it requires an Enbrighten smart control (primary switch) to function.

Specifications

Design Features

• For use in 3-, 4-, 5-, or 6-way configurations with Enbrighten Wi-Fi, Z-Wave, or Zigbee in-wall devices
• Requires wiring connections for neutral, traveler, and ground
• QuickFit design reduces housing depth by up to 20% vs. previous models and eliminates the need for heat tabs
• SimpleWire dual ground ports support daisy-chaining in multi-switch setups
• Connect up to four add-on switches to a single primary switch
• Maximum traveler wire distance: 300 ft. interconnected between four add-on switches; no more than 75 ft. between each switch
• Maximum traveler wire distance between primary switch and one add-on switch: 200 ft.
• Interchangeable rocker paddle — white and light almond included
• Uses a standard rocker wallplate (sold separately)

Installation Recommendations

• Insert wire into the terminal port and tighten the screw — do not wrap wire around the screw
• Indoor use only
• Wallplates sold separately
• Trilingual instruction manual included: English, French, Spanish
• Space-saving screw terminals for tighter wall-box fit

Related Enbrighten In-Wall Smart Controls

• 59337 — In-Wall Smart Switch, 120/277V
• 58433 — In-Wall Smart Switch
• 58438 — In-Wall Smart Dimmer
• 58449 — In-Wall Smart Outlet

Manufacturer Support

Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114. Consumer Care: 1-800-654-8483, M-F, 7AM-8PM Central Time. www.byjasco.com