DataComm Electronics 45-0024-WH — Recessed Pro-Power Kit with Duplex Receptacle Feature Sheet

Feature sheet for the DataComm Electronics 45-0024-WH Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet — a power relocation kit that lets you pass both power and low-voltage cables through the wall behind an HDTV, amplifier, or other AV device for a clean home theater install.

Features

• Works with the industry's thinnest mounts and HDTVs.
• 15 Amp/125 Volt tamper-resistant duplex receptacle allows power to be installed behind an HDTV or similar application.
• Conceals multiple low-voltage cables behind the HDTV.
• Metal mounting wings attach to the media plate and fasten tightly against the back of the wall — no separate low-voltage mounting plate needed.
• Flexible screen closes the interior opening of the mid-size plate and straight blade inlet.
• Female end of the extension cord recesses completely into the wall when plugged into the straight blade inlet.
• Male end of the extension cord has a 360° rotating flat head for easy access to any outlet.

Parts Included

• Recessed Low Voltage Mid-Size Plate with Duplex Receptacle
• Recessed Low Voltage Cable Plate with Straight Blade Inlet
• 6 ft. 16/2 with Ground Cord Set with 360° Rotating Flat Head
• Two (2) Electrical Outlet Boxes
• 15 Amp/125 Volt Tamper Resistant Duplex Receptacle

How It's Used

The kit is mounted between studs: an existing outlet feeds the receiver/AV equipment through the concealed wiring in the wall, while the straight blade inlet and its extension cord route power up behind the flat-screen TV without exposed cords or wall-mounted power strips.

Part Number

RoHS Compliant. *UR, UL Listed Component. This product is patent protected by U.S. Patent numbers D553475, D554475, and 7390964.