DataComm 50-6623-WH-KIT — Flat Panel TV Cable Organizer Kit with Duplex Power Solution

Feature sheet for DataComm Electronics' Flat Panel TV Cable Organizer Kit with Duplex Power Solution (50-6623-WH-KIT) — routes power and hides A/V cables in the wall behind an HDTV or other A/V devices.

Overview

This easy-to-install kit lets you route power and hide unwanted audio/video cables inside the wall behind your HDTV, amplifier, or other A/V devices — a power relocation kit that passes low voltage cables and power through the wall for a clean, professional home theater look.

Kit Contents

• Recessed Low Voltage Mid-Size Plate
• Recessed Low Voltage Cable Plate with Straight Blade Inlet
• Two (2) Electrical Outlet Boxes
• Four (4) Screws per Outlet Box
• 15 Amp/125 Volt Tamper Resistant Duplex Receptacle
• Three (3) Wire Nuts
• 6 Ft. 16/2 with Ground Cord Set with 360° Rotating Flat Head
• 8 Ft. Electrical Wire — Romex

Features

• Works with the industry's thinnest mounts and HDTVs.
• 15 Amp/125 Volt tamper-resistant duplex receptacle allows power to be installed behind an HDTV or similar applications.
• Conceals multiple low voltage cables behind your HDTV.
• Metal mounting wings attach to the media plate and fasten tightly against the back of the wall — no low voltage mounting plate necessary.
• Flexible screen closes the interior opening of the Mid-Size Plate and Straight Blade Inlet.
• Female end of the extension cord recesses completely into the wall when plugged into the Straight Blade Inlet.
• Male end of the extension cord has a 360° rotating flat head for easy access to any outlet.
• Included electrical wire (Romex) connects easily to the recessed cable plates for power relocation, eliminating the need for an electrician for the low-voltage side.
• Minimum order: 1; Master carton: 6.

Installation Layout

The kit routes concealed wiring from an existing wall outlet, through the wall, to a recessed low voltage mid-size plate and straight blade inlet positioned behind the flat screen TV — with the receiver connected on the equipment-room side. A flexible screen closes the interior opening of the mid-size plate and straight blade inlet to keep the finish clean.

Certifications

• RoHS Compliant
• Patent protected by U.S. Patent numbers D553475, D554475, and 7390964
• The receptacle is a UR/UL Recognized Component

Manufacturer

DataComm Electronics, Inc.
Phone: 888.223.7977 / 770.662.8205
Website: www.DataCommCableOrganizer.com