Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    DataComm 45-0001/45-0002/45-0003 — Recessed Low Voltage Cable Plate Installation Instructions

    September 08, 2026 2 min read

    Installation instructions for DataComm Electronics' 45-0001, 45-0002, and 45-0003 recessed low voltage cable plates.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    Installation instructions for DataComm Electronics' 45-0001, 45-0002 and 45-0003 recessed low voltage cable plates — used to install and hide low voltage cables (audio/video, data) behind a flat panel TV, amplifier, or other A/V equipment.

    Overview

    The 45-0001 (2-gang), 45-0002 (3-gang), and 45-0003 (1-gang) recessed low voltage cable plates are designed for use with low voltage / data cables only — not for electrical power wiring. They're built to work with standard 1-gang, 2-gang, and 3-gang low voltage mounting plate brackets from any major manufacturer (e.g. Caddy or Carlon). Each plate can be installed upright or upside down; install upside down when mounting behind a flat panel TV.

    Installation Steps

    1. Determine the mounting location for your flat panel TV, amplifier, or A/V device.
    2. Cut a hole in the wall and install the low voltage mounting plate bracket.
    3. Pull your low voltage cables through the mounted bracket, then through the DataComm recessed low voltage cable plate.
    4. Insert the recessed cable plate into the mounted bracket and secure tightly with the supplied cable plate screws.

    Safety Warnings

    • These recessed cable plates are designed for use with low voltage / data cables ONLY.
    • Never install low voltage wiring during lightning storms.
    • Never install low voltage wiring in wet locations unless the wire is specifically designed for wet locations.
    • Never touch un-insulated low voltage wires or terminals unless the wire has been disconnected at the network interface.
    • Use caution when installing low voltage cables.
    • Do not use this product near water — e.g. near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
    • Read and follow all warnings and instructions marked on the product, and save these instructions.

    Patent Information

    This product is patent protected by U.S. Patent numbers D553475 and D554475. Multiple patents pending.

    Manufacturer

    DataComm Electronics, Inc.
    6349 Peachtree Street, Norcross, GA 30071-1725
    Phone: 888.223.7977 / 770.662.8205
    Website: www.datacommelectronics.com