Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Danalock Universal Module V3 β€” User Guide

    September 08, 2026 3 min read

    User guide for the Danalock Universal Module V3 β€” controls any 12-24V powered door strike, magnetic lock, or gate mechanism via Bluetooth and/or Z-Wave, using the Danalock app.

    πŸ’Ύ Download Original PDF πŸ›’ View Product
    Full text manual (for reference)

    Overview

    The Danalock Universal Module V3 controls any 12–24V powered commercial locking mechanism β€” door strikes, electromechanical or magnetic locks, gates, and similar devices. It works in parallel with existing wiring or can be installed fresh. It has two relay outputs plus one power output, controllable remotely via the Danalock app (Android 4.4.4+ and iOS 9.0+ / iPhone 4S+) over Bluetooth Low Energy 4.0 and/or Z-Wave.

    Relay Mode

    The two relays operate in parallel or independently. Each relay can run for a set duration (1–180 seconds) or stay activated permanently. Relay 2 activation can be delayed after Relay 1 activates, and each relay can be individually configured for timed or permanent operation.

    Technical Specifications

    Operating voltage 12–24V DC, 12–24V AC
    Max input (at 24V) 100mA
    Number of relays 2
    Relay type Potential-free contacts (NO/NC)
    Max AC power / current 1A at 12V
    Max relay voltage 48V
    Wireless Bluetooth 4.0 LE / Z-Wave Plus (optional)
    Bluetooth range 5–10 meters

    Wiring β€” Terminal Reference

    Wire Color Function
    Black Power output, 12–24V AC/DC, 1A
    Brown Ground
    Red Relay 1: Normally open
    Orange Relay 1: Common
    Yellow Relay 1: Normally closed
    Green Relay 2: Normally open
    Blue Relay 2: Common
    Violet Relay 2: Normally closed
    Grey Power input, 12–24V AC/DC, 1A
    White Ground input, 12–24V AC/DC, 1A

    For a magnetic door lock or door strike installation, the Grey and White wires connect to the lock's own 12/24V input and ground lines respectively, in addition to the standard power/relay wiring above.

    Installation

    1. Connect the Universal Module to the relevant motor/lock drive per the wiring diagram above.
    2. Important: connect the Module to a smartphone during installation. Whoever registers as owner first is the only one who can control the door/gate and grant access to other users β€” so claim ownership immediately.
    3. Follow the Danalock App User Guide (danalock.com/?page_id=2894) to pair the module with your smartphone.
    4. During setup you'll be asked to set the Relay time. Check the motorized lock's own user guide for its recommended pulse time (commonly 1 second β€” the module defaults to 1 second). Relay time can be changed later under app settings.

    Ownership & Access Sharing

    The full Danalock App User Guide (danalock.com/?page_id=2894) covers sharing access with other users. To change the module's owner/administrator, delete the module from the app first, then pair it with the new owner's account.

    Caution: only delete the module from your keychain while within Bluetooth range. If out of range, you'll need to physically reset the module using the touch button (see below) β€” a reset on a built-in solution may require locksmith assistance and incur additional cost.

    Touch Button Commands

    The gold-colored touch button is located in one corner of the circuit board.

    Action Result
    Short press Switches the relay off
    Hold β€” 1 flash Switches the relays off
    Hold β€” 2 flashes Puts the module in Z-Wave inclusion mode
    Hold β€” 5 flashes Resets the key
    Hold β€” 10 flashes Factory reset of all key and relay settings

    Remote Access & Integration

    • Danabridge: since the module is only accessible while in Bluetooth range, use a spare smartphone or tablet as a Danabridge for remote access β€” see danalock.com/?page_id=2981.
    • Z-Wave: the Universal Module (Z-Wave variant) is compatible with a wide range of Z-Wave gateways β€” see danalock.com/?page_id=2597.

    Support

    FAQ: danalock.com/?page_id=3417

    Poly-Control ApS (maker of Danalock) β€” Gammel Stillingvej 427 C, 8462 Harlev, Denmark. Email: support@danalock.com. Phone: +45 4242 8122.