Chief NAF15BA — 1U Fan Panel Accessory Installation Instructions

Installation instructions for the Chief NAF15BA — a 1U rack-mount fan panel accessory for 19" wide equipment racks, made by Chief Manufacturing (a division of Milestone AV Technologies).

Important Warnings

• WARNING: Alerts you to the possibility of serious injury or death if instructions are not followed.
• CAUTION: Alerts you to the possibility of damage or destruction of equipment if instructions are not followed.
• WARNING: Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of the factory warranty. It is the installer's responsibility to ensure all components are properly assembled and installed per these instructions.

Specifications

Parts Included

• 1x Fan panel (A)
• 1x DC power supply (B)
• 1x Adapter (C)

Hardware required, not included: 4x 10-32 x 3/4" header point Phillips screws; 1x 4" cable tie.

Assembly and Installation

Note: The NAF15BA fan panel is designed for use with 19" wide equipment racks. See the specific installation instructions provided with your rack for additional installation information.

1. Attach the fan panel (A) within the rack, using four 10-32 x 3/4" header point Phillips screws (not included).
2. Plug the adapter (C) into the DC power supply (B).
3. Plug the power supply into the back of the NAF15BA fan panel (A).
4. Secure the power supply plug using a cable tie (not included) through the cable tie mount.
5. Plug the power supply into an available outlet.
6. Complete the installation following your rack's installation instructions.

Manufacturer

Chief Manufacturing, a division of Milestone AV Technologies (Chief® is a registered trademark).

USA/International: 8401 Eagle Creek Parkway, Savage, MN 55378. Phone: 800.582.6480 / 952.894.6280.

Web: www.chiefmfg.com. Document 8821-002002 Rev00.