X10 Slimfire Wireless Keychain Remote
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Details
Tiny Keychain Remote For Two X10 Modules
The X10 Slimfire Wireless Keychain Remote works with an X10 wireless transceiver and controls two X10 receiver modules independently. The remote sends On/Off and Dim/Brighten commands to Unit Codes 1 and 2. It's easy to program, easy to use, and small enough to fit on your keychain!
- Controls two X10 receivers
- Small enough for a pocket or keychain
- Easy to set up and use
- Works with any X10 transceiver
NOTE: Requires an X10 transceiver or wireless security system base receiver (sold separately).
The X10 Slimfire Keychain Remote is an X10 Wireless Transmitter
A basic wireless X10 system includes a Transmitter, a Transceiver and a Receiver – each sold separately. Wireless Transmitters are control devices that broadcast X10 radio frequency (RF) signals to Transceivers, which plugs into standard wall outlets. The Wireless Transceiver then converts the RF signal into an X10 signal and transmits it through your home's electrical wiring to X10 Receivers. When an X10 Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.
X10 Makes It So Easy To Automate Your Home!
X10 began manufacturing home automation and security products in the late 70s, establishing X10 as a smart home standard. X10 utilizes powerline technology to transmit control signals anywhere in your house over your existing electrical lines, so you can control lights and appliances throughout your home without running new wires! Have complete, automated control over lights and appliances from anywhere in your home with X10.
Specifications
- Weight: 0.16 lbs.
- Power Supply: One user-replaceable CR2025 3V lithium battery
- Transmission Range: Up to 100 feet