X10 PRO Inductive Fixture Module
Provides X10 Control Inside A Wired Fixture
You can enable X10 remote control inside a wired fixture with the X10 PRO Wired-In Inductive Fixture Module. Designed to control incandescent lighting fixtures or inductive loads, the module is compact enough to fit inside a single-gang box, a recessed lighting can, etc. This XPFM module is similar to the XPDF in-line fixture module, except this one supports inductive loads and does not support dimming.
- Controls a hard-wired fixture up to 15A
- Mounts in the fixture or a J box
- Responds to ON/OFF and ALL ON/OFF commands
NOTE: The module can only be used in fixtures where 60-degree C wiring is permitted.
The X10 PRO Inductive Fixture Module is an X10 Wired-In Receiver
A basic X10 system includes a Transmitter and a Receiver – both sold separately. Transmitters are control devices that send X10 signals through your home's electrical wiring to X10 Receivers. When a Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.
X10 Makes It So Easy To Automate Your Home!
X10 began manufacturing home automation and security products in the late 70s, establishing X10 as a smart home standard. X10 utilizes powerline technology to transmit control signals anywhere in your house over your existing electrical lines, so you can control lights and appliances throughout your home without running new wires! Have complete, automated control over lights and appliances from anywhere in your home with X10.
- Power Requirements: 120 VAC, 60 Hz
- Power Rating: 1800W, 15 Amps max.
- X10 Control: On/Off, All On/Off Capable
- Dimmable: No
- Max. Operating Temperature: 140° F (60° C)
- Dimensions: 2.94(L) x 2.06(W) x 1.3(D) inches