Skip to main content
  • Home
  • X10 Appliance Wall Switch

X10 Appliance Wall Switch


Order now and we'll ship same business day (if ordered before 3 pm PST).


WARNING: Cancer and Reproductive Harm –


Ideal For Fluorescent Lighting

Create both local and X10 remote control for a wired device with the X10 Appliance Switch. The switch supports incandescent, fluorescent, appliance, or motor loads. It can serve as a standalone switch or as the master switch in a 3- or 4-way application. A LED indicates the switch's on/off status.

  • Rated for loads up to 1800 Watts, 1/2 HP
  • Responds to ALL LIGHTS ON command
  • Compatible with X10 Companion Wall Switch

Neutral wire required for inductive loads.

White faceplate installed. Ivory color change kit included.

NOTE: Wallplate not included.

The X10 Appliance Wall Switch is an X10 Wired-In Receiver

A basic X10 system includes a Transmitter and a Receiver – both sold separately. Transmitters are control devices that send X10 signals through your home's electrical wiring to X10 Receivers. When a Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.

X10 Makes It So Easy To Automate Your Home!

X10 began manufacturing home automation and security products in the late 70s, establishing X10 as a smart home standard. X10 utilizes powerline technology to transmit control signals anywhere in your house over your existing electrical lines, so you can control lights and appliances throughout your home without running new wires! Have complete, automated control over lights and appliances from anywhere in your home with X10.


  • AC Voltage: 120 VAC, 60 Hz
  • Load Rating: 1800 Watts, 1/2 HP, 20 Amps
  • Dimmable: No
  • Connection Requirement: Neutral Wire
  • Certifications: CSA approved