Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Speco P8S10G — 10-Port Gigabit PoE Switch User Manual

    September 08, 2026 3 min read

    User manual for the Speco Technologies P8S10G 10-Port Gigabit PoE Unmanaged Switch (8 PoE ports + 2 Ethernet uplink) — installation, indicator lights, PoE Watchdog, switch modes, and full technical specs.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    User manual for the Speco Technologies P8S10G 10-Port Gigabit PoE Unmanaged Switch — 8 Gigabit PoE ports (port 1 supports BT90W) plus 2 Gigabit Ethernet uplink ports, for powering IP cameras and wireless access points on smaller networks.

    Description & Packing List

    The P8S10G is an 8-port Gigabit PoE switch with 2 additional Gigabit Ethernet uplink ports. Package contents:

    • Switch (see product label for specific model)
    • Power cable (pluggable or built-in power module, depending on version)
    • Mounting brackets and screws (rack type standard)
    • User manual and certification documents

    Installation

    Supports desktop, wall-mount, and rack-mount installation depending on environmental requirements. PoE and standard Ethernet switch installation methods are the same.

    Installation Precautions

    • Do not install in an environment prone to seepage, drips, or condensation — the equipment could burn out.
    • Ensure well-ventilated installation; never block the cooling holes.
    • Do not install in a high-density dust environment.
    • If rack-mounted in a natural heat-dissipation environment, ensure separation distance exceeds 1U.
    • Do not run aerial cabling outdoors — risk of lightning strike.

    Safety Precautions

    • Do not look directly at the optical port — laser beam can burn your eyes.
    • Do not install/remove the power cord while power is on — risk of personal injury.
    • Do not supply power before equipment installation and wiring are complete.
    • ESD protection is necessary during installation and maintenance.
    • Do not place objects on top of the device.

    Connecting Equipment

    • Network cable: 10Base-T: Cat3/4/5 or above UTP (≤250m). 100Base-TX: Cat5 or above UTP (≤150m). 1000Base-TX: Cat5 or above UTP (≤100m).
    • Grounding: Ensure the equipment's grounding screw is effectively grounded for safety.
    • Power cable: Keep power cable at least 10cm from network cable; use the local AC power cable for your region.

    Indicator Lights

    Indicator State Description
    S — Link Extension LED Light on / off Extension enabled / disabled
    V — Port Isolation LED Light on / off Port isolation enabled / disabled
    P — Power Indicator Light on / off Powered / abnormal
    PoE — PoE Indicator Yellow on PoE powered
    Link — Data Transmission Green on LAN linked
    Uplink — Link Rate Yellow on / Green on 10/100M / Gigabit

    PoE Powered Function

    Applicable to PoE switches only.

    • Standard PoE power supply includes: protocol detection, power pin sequence detection, power output, abnormal protection, and link abnormal monitoring.
    • Supported PoE protocols: IEEE802.3af (15.4W), IEEE802.3at (30W).
    • Standard PoE power pin sequence is 12+/36-; passive PoE power pin sequence is 45+/78-.
    • Standard PoE switches automatically detect and supply power only to PDs that meet the standard — non-PoE devices are not powered, only data is transmitted.
    • PoE Watchdog: When switch port communication fails, the corresponding port's PoE automatically detects the failure, restarts, and restores network communication without manual intervention.

    Switch Modes

    Function Definition Description
    N — Normal Mode Normal All ports communicate with each other; transmission distance within 100 meters, rate 10M/100M/1000M adaptive.
    V — Port Isolation Port Isolation PoE ports (1-8) cannot communicate with each other, only with uplink ports.
    S — Link Extension Link Extension Ports 1-8 PoE power supply and data transmission distance extended to 250 meters; transmission rate becomes 10M.

    Technical Specifications

    Power Input AC 100-240V, 50/60Hz
    Fixed Ports 8x 10/100/1000M PoE Ports (Port 1 supports BT90W) + 2x 10/100/1000M Ethernet Uplink Ports
    Switching Capacity 20Gbps
    Throughput 14.88Mpps
    Packet Buffer 2.5Mb
    MAC Address Table 2K
    Jumbo Frame 9216 bytes
    Transfer Mode Store and Forward
    MTBF 100,000 hours
    Product Dimensions 210 x 150 x 35 mm
    Weight Net 0.8kg / Gross 1.2kg

    Speco Technologies. Specifications and unit design subject to change without notice. Technical support: 1-800-645-5516.