Speco O4VB1M — 4MP IP Bullet Camera Quick Start Guide

Quick Start Guide for the Speco O4VB1M — a 4MP H.265 IP bullet camera. Covers warnings/precautions, package contents, part identification, network cable connection, junction box installation, and initial web login.

Package Contents

• Camera
• Quick Start Guide
• CD (includes IP Scanner utility)
• Drill Template
• 4 tapping screws, 1 machine screw
• Plastic plug x4
• Rubber plug
• Junction box

Overview — Key Parts

• Fixed ring: loosen to adjust view angle, tighten to lock
• Mounting base
• Ethernet connector
• DC power connector: not required if powered via PoE switch/injector
• Micro SD card slot
• Reset button

Tip: a security cap is recommended for outdoor installations.

Connecting the Network Cable

1. Loosen the nut from the main element.
2. Run the network cable (without an RJ45 connector attached) through both elements, then crimp on the RJ45 connector.
3. Connect the cable to the hermetic connector, then tighten the nut and the main cover.

Installation Steps

Before starting, confirm the wall or ceiling can withstand at least three times the weight of the camera.

1. Open the mounting base and the upper cover of the junction box.
2. Install the junction box onto the wall using the provided screws.
3. Mount the rubber plug into the gap of the mounting base and fasten the camera onto the mounting base.
4. Connect the cables, then install the camera onto the junction box.
5. Bracket adjustment: loosen the fixed ring to adjust the camera's view angle (pan 360°, tilt 90°); once positioned, tighten the fixed ring to complete installation.

Web Operation & Login

• The camera is set to DHCP mode by default. Ensure the camera and PC are on the same local network.
• Install and run the IP Scanner utility from the included CD to discover the camera on the local network.
• In the device list, view the IP address, model number, and MAC address of each discovered device. Double-click the applicable device to open the web viewer, or manually enter the camera's IP address in a browser's address bar.
• Default login: user name admin, password 1234. After logging in, follow the prompts to install any required plugins.

Warnings & Precautions

• If the product does not work properly, contact your dealer or nearest service center — never attempt to disassemble the camera yourself. Unauthorized modifications void the warranty.
• Do not allow water or liquid intrusion into the camera.
• All installation and operation should conform to local electrical safety codes; ensure the device is firmly mounted.
• Do not exceed the specified voltage range; avoid dropping the camera or subjecting it to physical shock.
• Avoid touching the camera lens; clean gently with a cleaning cloth only if necessary.
• Do not aim the camera at the sun or extremely bright light sources.
• Avoid extremely hot/cold, dusty, or damp environments, and high electromagnetic radiation exposure.
• Do not block any ventilation openings.