Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Speco O2iB68M — Intensifier Bullet IP Camera Quick Installation Guide

    September 08, 2026 3 min read

    Quick installation guide for the Speco O2iB68M Intensifier bullet IP camera with motorized varifocal lens and junction box.

    💾 Download Original PDF
    Full text manual (for reference)

    Quick Installation Guide for the Speco O2iB68M — a 2MP Intensifier® bullet IP camera with motorized varifocal lens, junction box, and 3-axis mounting bracket. Covers safety precautions, specifications, part identification, and step-by-step wall mounting.

    Key Features

    • 2.0 Megapixel 1/2.8" Sony progressive scan CMOS image sensor
    • IP67-rated weather-proof housing
    • 2.7~12mm / 5.0~50mm x10 optical zoom motorized lens options
    • Cable-managed bracket, 3-axis mechanism (pan/tilt/rotation)
    • Triple streaming of H.264 and MJPEG, up to 30fps at all resolutions, up to 1920x1080
    • Integrated motion detection with pre/post-alarm buffering
    • Full-duplex two-way audio, external mic input and speaker output
    • Privacy masking (up to 8 areas), tampering alarm (video analytics)
    • IEEE 802.3af PoE support, HTTPS, DDNS, DHCP client

    Specifications

    Category Spec
    CPU ARM1176JZF-STM, 400MHz
    Image Sensor 2.0MP 1/2.8" Sony progressive scan CMOS, 1945x1109 total pixels
    Minimum Illumination 0 Lux
    Lens 2.7~12mm or 5.0~50mm motorized varifocal, ICR day/night filter
    Video Compression H.264 High Profile (up to Level 5.0), Motion JPEG; multi-stream
    Resolution / Frame Rate Up to 1920x1080 @ 30fps (H.264); MJPEG up to 30fps @ VGA
    Image Settings Brightness, contrast, sharpness, WDR (Low/Middle/High), auto white balance, auto exposure, privacy mask, DSS, corridor view, mirror/v-flip
    Shutter Speed 1/4 ~ 1/2000
    Noise Reduction 2D / 3DNR
    Audio Two-way full-duplex, G.711 compression, 64Kbps/8KHz; mic in, line-in/line-out
    Network HTTP, HTTPS, DNS, RTSP, RTP, TCP, UDP, ICMP, DHCP, SNMP, IP filter
    Alarm Motion detection (12x12 blocks), external sensor input, 5MB pre/post-alarm buffer (180 sec), relay output (NO/NC)
    Memory / Reset Micro-SD slot; 1x factory reset button
    Power DC 12V/1.5A or PoE (IEEE 802.3af); max 5.0W with IR & heater on
    Weight / Dimensions 1060g (camera only), Ø98.5 x 262.5mm including bracket
    Operating / Storage Temp -10°C ~ 50°C operating; -20°C ~ 60°C storage

    Package Contents

    • IP Camera x1
    • Installation Guide x1
    • Tapping screw (Ø4 x 30) x4, Plastic anchor x4
    • L-Wrench (4mm) x1, L-Wrench (2.5mm) x1
    • Junction Box x1, Screw (M4 x 12L) x4 for junction box
    • CD x1 (includes IP Scanner utility for Windows)

    Connectors & Parts

    • Power Connector: DC12V
    • Network/PoE Connector: PoE (Power Over Ethernet) and LAN cable
    • Sensor In / Alarm Out: Sensor input on white (Sensor_In) / yellow (GND); alarm output on black (Alarm_Out) / red (COM)
    • Audio Out: White wire; Audio In: Red wire
    • Lens: 2.7~12 / 5.0~50mm vari-focal motorized megapixel lens
    • Heater: resistors that reduce condensation on the front glass
    • OSD cap: under the closing cap (opened with the 2.5mm L-wrench) — houses the Micro SD card slot and factory reset button

    Installation Steps

    Wall Mounting

    1. Drill four screw holes on the wall plate to fit the four supplied plastic anchors.
    2. Fix the plastic anchors in the drilled holes.
    3. Position the bracket over the screw points.
    4. Fix the bracket by tightening the four tapping screws.

    3-Axis Adjustment

    • Panning (360°): slightly loosen the pan bracket nut, adjust, then re-tighten.
    • Tilt (0°~100°): slightly loosen the tilt bolt, adjust, then tighten firmly.
    • Rotation (360°): loosen the tilt bolt, adjust rotation, then tighten firmly.

    Network Setup

    • The camera ships in DHCP mode by default. Use the included IP Scanner utility (Windows only) to discover the camera on the local subnet — only devices on the same subnet will appear.
    • Double-click the discovered device in IP Scanner to open the web viewer, or manually enter the camera's IP address into a browser.
    • Default login is admin / 1234. On first login, allow the ActiveX control installation prompt to view video.

    Safety note: Installation should be performed by qualified service personnel per local codes. Avoid extreme temperatures, high humidity, gas/oil exposure, and direct sunlight on the lens. Never disassemble the camera — there are no user-serviceable parts inside.