Skylink R3-T2 — 2-Button Keychain Remote Control Manual

Instruction manual for the Skylink R3-T2 2-Button Keychain Remote Control, compatible with Skylink R3 series receivers (R3G, R3R).

Overview

The R3-T2 keychain remote allows you to operate up to 2 different Skylink R3 series receivers. The package includes the keychain remote with a 3V lithium (CR2032) battery pre-installed.

Programming

To operate your receiver, the remote must be "learned" to it. Follow the instructions for your specific receiver model.

For R3G Receiver — Add Remote to Auto-Assigned Location

1. Press [ADD] — the display shows [0 0 0], the default memory location.
2. Press [ADD] again to select the memory location.
3. Press the button on the remote you'd like to use to operate the receiver.
4. The receiver emits 3 beeps once the remote is programmed.

The display then shows the next available memory location. Press [DISP] twice to exit, or add another remote by pressing its button.

For R3R Receiver — Learn Remote Control

1. Press and hold the learn button — the red LED flashes.
2. Activate the remote control by pressing the button you'd like to use to operate the receiver. The red LED on the R3R stops flashing and remains on once the remote is programmed.

Operation

• Press and hold the plastic case where marked "PRESS" to activate the built-in flashlight.
• Press the learned door button to activate the programmed receiver.

Battery Replacement

One 3-volt lithium (CR2032) battery is included.

1. Open the case with a coin.
2. Slide the old battery away from the battery holder.
3. Slide in the new battery with the positive (+) side facing up.
4. Firmly close the case.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, providing reasonable protection against harmful interference in a residential installation. If interference to radio or TV reception occurs, try: reorienting/relocating the receiving antenna, increasing separation between the equipment and receiver, connecting the equipment to an outlet on a different circuit, or consulting the dealer/an experienced radio-TV technician.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Warranty

If, within one year from the date of purchase, this product becomes defective (except battery) due to faulty workmanship or materials, it will be repaired or replaced without charge. Proof of purchase and a Return Authorization are required.

Customer Service

• Visit the FAQ section at www.skylinkhome.com
• Email support@skylinkhome.com
• Call toll-free 1-800-304-1187, Monday–Friday, 9am–5pm EST. Fax: (800) 286-1320

Skylink Group, 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3