SECO-LARM SD-7x051-V0 / SD-7x002-V0 — Request-to-Exit Key Switch Plates

Installation manual for the SECO-LARM Enforcer SD-7x051-V0 and SD-7x002-V0 series Request-to-Exit Key Switch Plates — stainless-steel keylock switch plates for access-control door and gate installations.

Overview

These tough stainless-steel plates securely and attractively finish access-control projects. The included, pre-wired keylock switch connects to electromagnetic door locks, gate locks, or other access devices to temporarily or permanently allow entry into or exit from a protected premises.

Family Models

Switch Behavior

• Momentary models (SD-72051-V0 / SD-71051-V0): Includes shunt ON, momentary OFF spring-loaded keylock switch. The switch is maintained ON, and springs back from OFF. Key is removable from the ON position only.
• Shunt models (SD-72002-V0 / SD-71002-V0): Includes maintained ON/maintained OFF keylock switch. The switch can be left ON or OFF. Key is removable from either the ON or OFF position.

Note: SD-72051-V0, SD-71051-V0, SD-72002-V0, and SD-71002-V0 are keyed to number 1300. Additional key numbers are available — contact SECO-LARM for details.

Specifications

Typical Installation

A typical setup pairs an SK-983A digital keypad and an SD-series request-to-exit plate, both feeding into a power supply (e.g., ST-2406-2A), which powers an electromagnetic lock (e.g., E-941SA-1200) — allowing either the keypad or the key switch to release the door.

Warranty & Notes

This SECO-LARM product is warranted against defects in material and workmanship for one (1) year from the date of sale to the original consumer customer. SECO-LARM's policy is one of continual development; specifications are subject to change without notice, and SECO-LARM is not responsible for misprints.