SECO-LARM SD-211-BD1Q Electro-Mechanical RIM Lock — Manual

Manual for the SECO-LARM SD-211-BD1Q Electro-Mechanical RIM Lock — a 12VDC fail-secure lock for pedestrian gates or doors, with a fully mechanical manual-override key so it can still be unlocked if power is lost. Non-handed design fits left, right, in-swing, or out-swing doors.

Features

• 12VDC, fail-secure operation with manual override.
• Fully mechanical — can be unlocked even if power is lost.
• Unlocks from outside with the included keys.
• Compatible with access control devices.
• Installs on left, right, in-swing, and out-swing gates/doors.
• 2,250-lb (1,020kg) static strength.

Introduction

Designed for pedestrian gates or doors, the SD-211-BD1Q can be triggered by an access control system, unlocked by key from outside, or opened by manually pushing the button from inside. Mounts on both in-swing and out-swing doors; non-handed.

Parts List

Lock body, strike body, key plate, key guard, cylinder lock, 3 keys, 11 M5 self-tapping screws, 4 M3 self-tapping screws, 2 long screws, 2 lock body cover screws, mounting template.

Specifications

Sample Installation

The recommended distance between the strike body and the lock body is 3/16" (5mm). Rotate the latch to adjust between in-swing and out-swing configuration.

1. Determine the best mounting location for the strike body and lock body.
2. Place the included template on the closed gate/door and frame. Drill four 1/8" (3mm) holes for the lock body, four 1/8" (3mm) holes for the strike body, a 1-1/4" (32mm) hole for the cylinder lock, and a wire-routing hole. (Note: template/lock orientation varies with door handedness; there's also a second, optional wire hole in the back of the lock body.)
3. Install the key plate to the gate/door or frame with four M3 self-tapping screws.
4. Assemble the cylinder lock from the opposite side of the door so its flat pin inserts into the lock body (cut the flat pin and long screws to the appropriate length first).
5. Secure the cylinder lock with the two long screws.
6. Remove the lock body cover (unscrew the two screws on the latch side).
7. Mount the lock body with four M5 self-tapping screws.
8. Remove the strike body cover, mount the strike body with four M5 self-tapping screws, and reattach its cover. (Note: the strike's faceplate has three screw holes for added stability.)
9. Connect the non-polarized wires to an access control system.
10. Test the lock, then reattach the lock body's cover.

Note: copy keys as necessary and save one as the master key — replacement keys are not available.

Adjusting Between In-Swing and Out-Swing

1. Remove the lock body cover by removing the two small screws on the latch side.
2. Press the pin until the latch protrudes from the lock body, rotate it into the correct position, then release pressure so the latch retracts into place.

Troubleshooting

Related SECO-LARM Products

Electro-Mechanical Latch (SD-231-ND1Q), Electromagnetic Gate Lock (E-942FC-1300), Heavy-Duty Outdoor Stand-Alone Keypad (SK-3523-SDQ), No-Cut Electric Door Strike (SD-993C-D3Q).

Warranty

Warranted against defects in material and workmanship for one (1) year from date of sale to the original customer. SECO-LARM's obligation is limited to repair or replacement of the returned (transportation prepaid) unit.

Important: users and installers are responsible for ensuring this product complies with all national, state, and local laws and statutes related to monitoring and recording audio/video signals.

SECO-LARM U.S.A., Inc. — 16842 Millikan Avenue, Irvine, CA 92606 | (949) 261-2999 / (800) 662-0800 | www.seco-larm.com