Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    SECO-LARM SB-L10V1-20Q — ENFORCER Plug-and-Play In-line Backup Power

    September 08, 2026 3 min read

    Full instruction manual for the SECO-LARM ENFORCER SB-L10V1-20Q Plug-and-Play In-line Backup Power UPS, covering specifications, LED indicators, sample installation, and troubleshooting.

    💾 Download Original PDF
    Full text manual (for reference)

    Full instruction manual for the SECO-LARM ENFORCER SB-L10V1-20Q Plug-and-Play In-line Backup Power UPS, covering specifications, LED indicators, sample installation, and troubleshooting.

    Overview

    The ENFORCER Plug-and-Play In-line Backup Power unit provides automatic, continuous power to CCTV cameras, routers, modems, VOIP phone systems, employee time and attendance systems, alarm systems, or other small electronic devices during power outages. It includes protection against short-circuits and power surges, and its lithium polymer battery is protected against short-circuit, overcharge, over-discharge, and overload.

    Features

    • Real-time backup power with no break when input power is lost.
    • DC UPS auto-start.
    • LED indicators for power and charging.
    • 2000mAh lithium polymer battery.
    • Over-discharge, overcharge, overload, short-circuit, and surge protection.
    • Auto-recognizes voltage (5/7.5/9/12VDC) input and sets corresponding output.
    • Additional indicator LEDs for output voltage and alarm (alarm is also audible).

    Specifications

    Spec Value
    Type In-line UPS
    Input 5/7.5/9/12VDC ±10%
    Input protection Overload and short-circuit fuse
    Input jack type 5.5x2.1mm DC jack
    Output Auto-configure 5/7.5/9/12VDC ±5%
    Output power rating 10W
    Output protection Over-discharge, overload, short-circuit protection
    Battery Lithium Polymer 3.7VDC/2000mAh
    Backup time (half load) 60 min
    Backup time (full load) 25 min
    LED indicators Voltage, power, alarm, backup
    Output cord 12" (30.5cm)
    Output plug type 5.5x2.1mm DC plug
    Operating temperature 32~104°F (0~40°C)
    Operating humidity 0~95% non-condensing
    Dimensions 3 3/8" x 2 1/4" x 1 21/32" (85x57x42mm)
    Weight 4.3 oz (121g)

    LED & Status Indication

    • Voltage (Green): On — indicates detected input voltage and supplied output voltage.
    • Power (Green): On — UPS protection on; Off — UPS protection off.
    • Alarm (Red): On — overload, input voltage out of range, or input failure; Flashing — battery low.
    • Backup (Yellow): On — backup mode; Off — line mode.

    Audible alarm: a continuous long beep indicates alarm or failure; 5 short beeps indicate transferring to backup power; continuous short beeps indicate low battery.

    Parts List

    • 1x UPS with battery and power cord
    • 1x Manual

    Installation

    Note: For devices with non-standard DC plugs, DC plug adapters (not included) may be needed. Do not cut the DC plug cord, as this will void the warranty. To reach full power backup time, allow the unit's battery to charge for at least 24 hours.

    1. Disconnect the original power adapter from the device to be powered and plug it into the In-line Backup Power unit. The correct voltage will be automatically detected and the voltage indicator LED should light showing the correct voltage.
    2. Connect the In-line Backup Power unit's output line to the device to be powered. The voltage indicator LED should light within 5 seconds and the "power" LED should also be lit.
    3. To test the installation, unplug the adapter from the AC wall outlet momentarily. The yellow "Backup" LED should light and 5 short beeps will indicate backup mode has started. The device should remain powered. Continuous short beeps with a flashing red "alarm" LED indicate a low battery.

    Note: If the In-line Backup Power unit is later used for another device, press the "off/reset" button before installation to allow it to re-detect the correct voltage.

    Troubleshooting

    Symptom Solution
    Backup time is shorter than claimed On initial installation, ensure the battery has charged for 24 hours before testing backup time.
    The power plug does not fit my unit You may need a power tip adapter (male and female) to connect to your device.
    Device does not turn on when installed Check that all plugs are firmly connected, the AC outlet is live, the power LED is lit, and that the device's voltage is compatible (5, 7.5, 9, or 12VDC). Check for a short or overload — the unit cuts power when detected. Press "Off/Reset" to reset voltage output.
    During a power outage, power is not provided to the device Check for a short or overload, and ensure input voltage is 5, 7.5, 9, or 12VDC.
    Alarm sounds (long beep) and red LED is lit Ensure the original power adapter is working, the device draws no more than 10W, and check for a short-circuit at the device.

    Warranty

    Warranted against defects in material and workmanship for 1 year from date of sale to the original customer. Void if damage is caused by misuse, abuse, neglect, unauthorized repair or alteration, or improper installation. SECO-LARM's sole obligation is repair or replacement at its option.

    Manufacturer

    SECO-LARM U.S.A., Inc., 16842 Millikan Avenue, Irvine, CA 92606. Phone: (949) 261-2999 / (800) 662-0800.