SECO-LARM MVE-AH1H1-42YQ 4K Enhanced HDMI Long-Range Extender — Specification Sheet

Specification sheet for the SECO-LARM ENFORCER MVE-AH1H1-42YQ 4K Enhanced HDMI Long-Range Extender, which sends HDMI video/audio plus RS-232 and bi-directional IR over a single Cat5e/6 cable up to 492ft (150m) for 1080p or 394ft (120m) for 4K2K/UHD.

Overview

This extender uses an active transmitter and receiver pair to send HDMI signals over a single Cat5e/6 cable. It can send 1080p signals up to 492ft (150m) between the two units with zero signal loss, and 4K2K/UHD HDMI signals up to 394ft (120m), using a single power supply on either end. The set ships complete and is plug-and-play.

Features

• Extends 1080p up to 492ft (150m) and 4K2K up to 394ft (120m)
• Supports resolutions from 480i to 4K2K/UHD
• Supports 18Gbps video bandwidth
• Plug and play operation — comes as a complete transmitter/receiver set
• HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
• Transmitter includes an HDMI loop output
• Analog stereo output on receiver
• Bi-directional IR, RS-232, and CEC pass-through
• Supports HDR, HDR10+, Dolby Vision, and HLG
• Includes one 24VDC power supply — the set can be powered at either the transmitter or receiver end

Overview — Connections

Transmitter: Power input, HDBaseT Out, HDMI Loop-out, HDMI In, IR In, IR Out, RS-232, Link LED, Data LED.

Receiver: Power input, HDBaseT In, HDMI Out, Audio Out, IR In, IR Out, RS-232, Link LED, Data LED.

Sample Application

A remote control at the AV source location controls devices via the transmitter's IR In, while a remote at the distant display location controls the source through the receiver. Only one power supply is needed — connect it at either the transmitter or the receiver, not both. Use IR IN on the transmitter with IR OUT on the receiver to control a distant HDMI display from the source side, or IR IN on the receiver with IR OUT on the transmitter to control the source from the display side.

Specifications