Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    SECO-LARM EV-Y1201-A2WQ / AMWQ — 4-in-1 HD Bullet Camera Manual

    September 08, 2026 3 min read

    Manual for the SECO-LARM ENFORCER EV-Y1201-A2WQ and EV-Y1201-AMWQ 4-in-1 HD Bullet Cameras, selectable between TVI, CVI, AHD, and Analog formats.

    💾 Download Original PDF
    Full text manual (for reference)

    Manual for the SECO-LARM ENFORCER EV-Y1201-A2WQ and EV-Y1201-AMWQ 4-in-1 HD Bullet Cameras — 1080p security cameras selectable between TVI, CVI, AHD, and Analog output formats via OSD joystick.

    Overview

    These 4-in-1 bullet cameras support TVI, CVI, AHD, and legacy Analog formats from a single unit, switchable via the on-board OSD joystick controller — no DIP switches needed. The EV-Y1201-A2WQ is a fixed-lens model; the EV-Y1201-AMWQ is a varifocal model with adjustable zoom and focus.

    Models

    Model Lens Resolution Voltage Style
    EV-Y1201-A2WQ 2.8mm 1080p 12VDC Bullet, White
    EV-Y1201-AMWQ 2.8~12mm (varifocal) 1080p 12VDC Bullet, White

    Features

    • Select between TVI, CVI, AHD, and Analog formats
    • 1080p resolution
    • ICR module (auto day/night)
    • Joystick OSD control
    • 3D-NR (3D Digital Noise Reduction)
    • DWDR (Digital Wide Dynamic Range)
    • Rugged, weatherproof (IP66) construction
    • Cables concealed in bracket to prevent tampering

    Technical Specifications

    Spec EV-Y1201-A2WQ EV-Y1201-AMWQ
    Type Fixed Bullet Camera Varifocal Bullet Camera
    Formats TVI (Default) / CVI / AHD / Analog
    CMOS 1/2.9" 2MP Sony CMOS
    Resolution (HD) 1920x1080
    TV Lines (Analog) 1200TVL
    Viewing Angle 90° 30°~90°
    # of IR LEDs 30 3 (IR III)
    IR Range Up to 50ft (15m) Up to 100ft (30m)
    FPS / F Stop 30FPS / F1.4-F1.6
    Operating Voltage 12VDC
    Current Draw (IR On / Off) 160mA / 90mA 400mA / 90mA
    IP Rating IP66
    Operating Temperature -4°~131°F (-20°~55°C)
    Dimensions 6 9/16" x 2 9/16" (166x65mm) 10 7/16" x 3¼" (265x83mm)
    Weight 14.1 oz (400g) 1 lb 10.8 oz (760g)

    Parts List

    • 1x Bullet camera, 1x Mounting template, 1x Manual
    • 3x/4x Screws, 3x/4x Screw anchors (4x on AMWQ only)
    • 1x DC plug with terminal block, 1x Hex wrench, 1x Flathead screwdriver (AMWQ only)

    OSD Controller Settings

    To set video format via the OSD joystick controller, press the controller in the desired direction, hold for 5 seconds, and release when the camera restarts:

    Direction Format
    Up CVI
    Down TVI
    Left CVBS (Analog)
    Right AHD

    Zoom & Focus Adjustment (AMWQ only)

    Open the zoom/focus compartment with the included hex wrench, then use the flathead screwdriver to loosen the zoom and focus screws for adjustment. Push the focus screw toward "N" to focus close, or toward "F" to focus far. Push the zoom screw toward "T" to zoom in, or "W" to zoom out.

    Installation

    1. Run a 12VDC power supply wire and video cable with a male BNC connector to the mounting location.
    2. Temporarily connect the camera to power and the BNC video cable.
    3. While watching the monitor, hold the camera against the mounting surface and confirm the location.
    4. Adjust zoom and focus as needed (AMWQ only).
    5. Use the OSD joystick to set the desired format.
    6. Mark the mounting holes with the included template, disconnect power/video, and mount the base with the provided screws.
    7. Reconnect power and video, confirm proper signal, then adjust camera angle and position.
    8. Perform a final test of the camera and monitor.

    Important: Do not cut any wires — doing so voids the warranty.

    Troubleshooting

    Symptom Check
    Screen is blank Camera/monitor powered up; power supply polarity correct; video cable connected properly
    Screen image is dim Clean the lens; check light source
    Poor contrast Adjust monitor contrast; reposition camera
    Flickers / distorted Reposition camera; check cables and format setting
    Camera case is hot Confirm correct power supply is in use

    Warnings & Compliance

    Warning: Stop using the camera if you see smoke or unusual heat. Do not open the case — no user-serviceable parts inside. This device complies with FCC Part 15 rules.

    Warranty

    Warranted against defects in material and workmanship for three (3) years from date of sale to the original customer. SECO-LARM's obligation is limited to repair or replacement, transportation prepaid.