SECO-LARM ENFORCER 190/190S — Glass Break Detector Installation Instructions

Overview

The SECO-LARM ENFORCER 190/190S is an audio-discriminator glass break detector for perimeter security, designed to detect the high-frequency sound of glass breaking. Its patented yellow "turbulence" LED allows fast, easy sensitivity adjustment without needing an external test meter — eliminating a common source of false alarms with older glass break detectors.

Key Features

• Patented yellow turbulence LED for fast, pinpoint sensitivity adjustment without external test equipment
• Detects the high-frequency sound of glass breaking
• ENFORCER 190: wide 25' radius protection if ceiling-mounted, 45' if wall-mounted
• ENFORCER 190S: wide 20' radius protection if ceiling-mounted, 35' if wall-mounted
• Red trigger LED indicates when a trigger signal is sent to the alarm
• Tamper-proof case
• Installs without RF-shielded cable
• Compact, unobtrusive design suitable for any room

How It Works

A single ENFORCER 190/190S, ceiling-mounted, can protect all windows and doors within a 15' radius — eliminating the need for individual detectors on each pane of glass. The relay output is programmed for a 2-second reset.

Installation Hints

• The ENFORCER 190/190S usually receives power from the alarm panel. If connected to a separate power source, it should also be connected to a rechargeable battery in case AC power fails.
• Use either Terminals 2 and 3 for N.O. output, or Terminals 2 and 1 for N.C. output — but not both.
• Close all doors and windows when the ENFORCER 190/190S is in use.
• Mount any memory buzzer, musical device, or other sound-generating equipment as far from the ENFORCER 190/190S as possible to reduce the chance of accidental triggering and to reduce the chance of a thief locating the detector.

Specifications

Manufacturer Notice

SECO-LARM reserves the right to change specifications without further notice as part of its policy of continual development and improvement.