Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    SECO-LARM DP-236Q — Wireless Video Door Phone Specifications

    September 08, 2026 2 min read

    Specifications for the SECO-LARM Enforcer DP-236Q Wireless Video Door Phone, a handheld home entry monitor and camera system.

    💾 Download Original PDF
    Full text manual (for reference)

    Specifications for the SECO-LARM ENFORCER DP-236Q Wireless Video Door Phone — a handheld home entry solution with a 3-3/8" screen, two-way talk, photo capture, and gate/door unlock.

    Overview

    The ENFORCER Wireless Video Door Phone lets you observe visitors on a large 3-3/8" screen as they arrive, communicate with them, take photos for later viewing, and unlock a gate or door — all from the wireless handheld monitor. Up to three monitors can be paired to one camera for viewing anywhere in the home, and the camera's wide 170° viewing angle covers entry areas without compromising security.

    Key Features

    • Talk with visitors and unlock doors or gates directly from the monitor
    • Handheld monitor has a rechargeable battery for communicating while moving around the premises
    • Wide 3-3/8" monitor screen; connect up to two additional monitors (sold separately) for a 1-camera/3-monitor setup
    • Includes kickstand and charging base for the monitor
    • Egress input allows connection to a Request-to-Exit plate or other egress device
    • 9~16 VAC/VDC operation — connects to most doorbell circuits
    • Adjustable lens for a wide variety of viewing angles
    • Camera's built-in PIR sensor takes photos of approaching visitors; up to 100 images stored in memory
    • Built-in LEDs for nighttime operation; camera is IP55 rated for outdoor use
    • Tamper switch triggers alarm if the camera is removed from its base
    • Four programmable doorbell tones
    • Wireless range up to 492ft (150m), line-of-sight

    Specifications — Camera

    Spec Value
    Type Color camera
    Chip CMOS
    Resolution 480 TV lines
    Lens 2mm
    Viewing angle 170°
    Operating voltage 9~16 VAC / 5~16 VDC
    Relock delay 1~6 s
    Relay output 3A @ 250VAC/30VDC
    Current draw (active / standby) 250mA @ 4.2VDC / 3mA @ 4.2VDC
    Battery life (active / standby) 4.4 hours / 366 hours (15 days)
    PIR detection range / angle 9' (3m) / 138°
    Dimensions 5-11/16" x 3-1/8" x 1-15/16" (144x80x50 mm) with bracket
    Weight 4.3 oz (122g)
    Operating temperature 14°~122°F (-10°~50°C)

    Specifications — Monitor

    Spec Value
    Display 3-3/8" (86mm) TFT
    Operating voltage 5VDC (adapter) or 3.7VDC (battery)
    Current draw (active / standby) 220mA @ 4.2VDC / 5mA @ 4.2VDC
    Battery life (active / standby) 4.4 hours / 220 hours (9 days)
    Operating frequency 2410.875~2471.625 MHz
    RF power 120mW
    Wireless range 492' (150m), line-of-sight
    Dimensions 5" x 3-3/8" x 7/8" (127x85x22 mm)
    Weight 3.9 oz (110g)
    Operating temperature 32°~104°F (0°~40°C)

    Sample Connector Wiring

    The camera connects via a screw terminal block with COM, N.C., N.O., egress input, and power terminals — supporting a fail-secure electric strike, a Request-to-Exit plate, and an included AC adapter or the doorbell's transformer. The camera's power leads are negative (black wire) and positive (red wire).

    Optional Accessories

    • DP-236-MQ — Additional Monitor
    • DP-236-BQ — Replacement Battery

    About SECO-LARM

    SECO-LARM® U.S.A., Inc. · 16842 Millikan Avenue, Irvine, CA 92606 · Phone: (949) 261-2999 / (800) 662-0800 · www.seco-larm.com