Optex InSight Cube (INS-CUBE) — Visual Verification Indoor Camera Datasheet

Datasheet for the OPTEX InSight Cube (INS-CUBE) — a Visual Verification 2M FHD IP Indoor Cube Camera. Part of the OPTEX InSight Visual Verification Series, the InSight Cube is a compact, all-in-one PIR-based visual verification solution ideal for indoor applications where the InSight Outdoor PIR Camera Series would be too large or bulky. It combines passive infrared detection, 2-way audio, and video in one unit, is ONVIF compliant, and connects directly to the OPTEX Visual Verification Bridge as well as any DVR, NVR, or VMS.

Key Features

• Built-in passive infrared (PIR) detection sensors, 2-way audio, and video recording all in one compact unit — helps eliminate false alarms and dispatches
• Optimizes video quality between high-movement and low-movement detection areas for maximum efficiency
• Double scanning sensor provides up to 30fps at 1080p resolution
• Plug & play integration with the OPTEX Bridge; fully integrated and certified by Bridge and CHeKT portal
• ONVIF compliant — supports Alert by ONVIF and anti-tamper (scene change detection via VCA)
• Up to 3 simultaneous 1080p streams with different resolution/rate/frame-rate settings (optimized multi-profile streaming)
• Compatible with any web browser (Chrome, Firefox, Safari, etc.) via a flexible plug-in program

Specifications

Camera

• Image sensor: 1/2.8" Progressive Scan CMOS
• Lens: 2.8mm, F1.6
• Minimum illumination: 0.035 Lux; AGC On: 0 Lux with IR (F1.6)
• IR range: up to 10m
• Angle of view: 110°
• PIR range: up to 10m, 120° angle of view
• Day/Night: IR cut filter with auto switch
• Shutter times: 1/15s – 1/32,000s

Compression & Image

• Video compression: H.264, H.265, MJPEG
• Video bit rate: 100Kbps – 10Mbps
• Audio compression: G.711
• Max image resolution: 1920 x 1080
• Frame rate: 30fps at 60Hz
• Digital Noise Reduction: 3D DNR
• Wide Dynamic Range: True WDR
• Image settings: Rotate mode, Saturation, Brightness, Contrast, Sharpness, AGC, ROI

Functions & Security

• Alarm triggers: motion detection, network disconnect, IP address conflict, storage exception, temperature critical, PIR detection, audio detection
• Local storage: built-in Micro SD/SDHC/SDXC card slot, up to 128GB
• Security: one-key reset, flash-prevention, dual stream, password protection, privacy mask, IP address filtering, anonymous access
• Protocols: TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour

Physical

• Working temperature: -20°C to 50°C (-4°F to 122°F), 90% max humidity
• Dimensions (V x H): 87.6mm x 114mm x 72.1mm
• Weight: 297g

Electrical & Interface

• Power supply: 12V DC ±10%, or PoE (802.3af)
• Power consumption: 12V DC 6.4W, PoE (802.3af) 6.8W
• Communications: 1 RJ45 10M/100M Ethernet port
• Audio input: built-in microphone; Audio output: built-in speaker
• Alarm out (NO/NC): 1 channel signal; Tamper alarm (switch): 1 channel signal
• Wi-Fi: IEEE802.11b/g/n, 2.4 GHz ~ 2.4835 GHz, 20MHz channel bandwidth
• Wireless security: 64/128bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS
• Wireless range: 25m (dependent on environment)

Certifications

• FCC, CE

Important Notice

This unit is designed to detect an intruder and activate an alarm control panel as part of a complete system — OPTEX cannot accept responsibility for damages or other consequences resulting from an intrusion. This product can produce and record moving/still images that may include identifying information (such as a person's face); compliance with local privacy and personal-information laws is the responsibility of the installer/user prior to installation and use.

Manufacturer

Contact: 800-966-7839 / sales@optexamerica.com — www.optexamerica.com