On-Q/Legrand Universal Mounting Plates (364896-01/364904-01) — Installation Instructions

Installation sheet for the On-Q/Legrand Universal Mounting Plates, designed to easily mount a variety of products inside an On-Q style structured wiring enclosure.

Overview

On-Q Universal Mounting Plates are available in a half-width version (P/N 364896-01) and a full-width version (P/N 364904-01). The half-width plate comes with two Velcro® hook-and-loop straps for securing products; the full-width plate comes with four straps. Each plate has multiple slots for attaching products of varying thickness in either vertical or horizontal orientation.

Installation Steps

Universal Mounting Plates are typically installed during the "trim-out" phase of a new installation, or as part of an upgrade to an existing installation.

1. Align and insert the stationary tabs on the left-hand side of the plate into the square slots in the enclosure.
2. Use the push-pin on the right side of the plate to secure the plate to the enclosure.
3. Use the included hook-and-loop straps to firmly mount the product to the plate.

Specifications

• Half-width Universal Mounting Plate — P/N 364896-01 (includes 2 Velcro® straps)
• Full-width Universal Mounting Plate — P/N 364904-01 (includes 4 Velcro® straps)
• Manufacturer: On-Q/Legrand
• Document: IS-0309 Rev. O

©Copyright 2006 by On-Q/Legrand. All Rights Reserved.