0

Your Cart is Empty

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • On-Q/Legrand Multi-Voltage Power Distribution Module (PW7639) — Installation Instructions

    September 08, 2026 2 min read

    Installation instructions for the On-Q/Legrand Multi-Voltage Power Distribution Module (P/N PW7639) — distributes 15V, 12V, and 5V DC power to modules and devices in an On-Q enclosure.

    Full text manual (for reference)

    Installation instructions for the On-Q/Legrand Multi-Voltage Power Distribution Module (P/N PW7639) — distributes 15V, 12V, and 5V DC power to modules and devices in an On-Q enclosure.

    Overview

    The On-Q/Legrand Multi-Voltage Power Distribution Module (P/N PW7639) allows you to power a wide variety of modules and devices from a single, centrally-mounted power point in a structured wiring enclosure.

    Features

    • Powers a wide variety of modules and devices.
    • Distributes 15 volts DC to up to four locations (3 front / 1 rear).
    • Distributes 12 volts DC to up to two locations.
    • Distributes 5 volts DC to one location.
    • Includes single bay bracket (P/N 364890-01) for mounting in an On-Q style enclosure.
    • Includes six 24" power cord jumpers.
    • Overcurrent protected with an automatically resetting polyswitch device.
    • Main power indicator LED and Overcurrent LED.

    Power Requirements

    • Power is supplied by up to two 15V, 1.45A power supplies (P/N PW7715), purchased separately.
    • To provide the specified voltage and maximum total power, the module must be connected to two power supplies.
    • Using two supplies, max total current is 2.9A; 1A max per port.
    • If max total current is exceeded, the red "Overcurrent" LED illuminates and DC output power cannot be guaranteed.

    Installation Steps

    1. Snap the Power Distribution Module onto the included bracket using the push-pins at each corner.
    2. Plug the cord from the first power supply into the socket labeled "IN 1"; if using a second power supply, plug its cord into "IN2".
    3. Without mounting the module, find the spot in the enclosure where all the power cord jumpers can reach the modules to be powered.
    4. Mount the module/bracket into the enclosure: insert the tabs on the left side of the bracket into the enclosure slots, then push the bracket pushpin into an appropriate enclosure hole to secure it.
    5. Make the appropriate connections with the power cord jumpers.
    6. Plug the power supplies into the AC input receptacle(s).

    Manufacturer: On-Q/Legrand, 301 Fulling Mill Road, Suite G, Middletown, PA 17057 · 800-321-2343 · www.onqlegrand.com