On-Q/Legrand AC1001 6-Port Network Interface Module Installation Sheet

Instruction/installation sheet for the On-Q/Legrand 6-Port Network Interface Module (AC1000/AC1001) — a structured wiring interconnect for residential networking, punch-down mounted in an On-Q Service Center Enclosure.

Introduction

The On-Q/Legrand 6-Port Network Interface Module (P/N AC1000) provides a convenient structured interconnect for residential networking applications. It has six Category 5e rated RJ45 connectors typically punched down to room locations. Services such as internet access over a switch/router are then jumpered to the locations using front-panel jacks (jumpers sold separately). The module ships with a mounting bracket for any On-Q Service Center Enclosure, and can also be mounted Bay-style for higher-density multi-bay applications.

Description

The 6-Port Network Interface Module (P/N AC1000) consists of a bracket, a plate, and six Category 5e rated RJ45 inserts.

Note: Part number AC1001 is also available (without inserts) to allow use of any dealer-selected Keystone inserts.

Cat 5e cables from room locations are punched down onto the inserts following T568A recommendations. Use of a tool such as the On-Q Palm Tool (P/N 364378-01) is recommended to aid the punch-down operation. The inserts are then installed into the plate.

Installation

1. Punch down and install the RJ45 inserts into the plate.
2. Attach the plate to the included bracket using push pins in each corner.
3. Install the bracket into an On-Q style enclosure using the On-Q style tabs and pushpin.
4. Alternatively, install the plate in a Bay-style multi-bay bracket.

© Copyright 2006 by On-Q/Legrand. All Rights Reserved.