Nuvo P10 Keypad (NV-P10-XX) — Installation Instructions

Overview

The Nuvo P10 Keypad (NV-P10-XX) offers convenient in-wall control of core functions for a single zone of any Nuvo Player Portfolio system. It provides easy command of Volume, Mute, Play, and Pause, plus Next/Previous track navigation and access to five system preset Favorites. With a sleek backlit design, single-gang architecture, and available color options (white, light almond, and nickel), the P10 fits any decor. It works in two-way communication with the NuVo Player app to keep both control methods perfectly in sync, and is powered by a single RJ45 PoE connection.

Catalog numbers: NV-P10-WH, NV-P10-LA, NV-P10-NI

Front Panel Controls

• Play / Pause
• Skip Forward / Back
• Favorite button
• Volume control
• Mute

Rear Panel

• PoE Ethernet connection (RJ45)

Installation Steps

1. Pull a Cat 5, Cat5e, or Cat 6 cable from an 802.3af Class 1 compliant PoE port of a Power over Ethernet switch or power injector that provides a minimum of 10/100BaseT Ethernet, into a single-gang box or low-voltage ring at the eventual location of the P10 keypad. Use the TIA/EIA 568A wiring standard on both ends of the cable when crimping the RJ45 connector.
2. At the NV-P10 location, plug the terminated Cat 5 cable from the switch port or power injector into the Ethernet port of the NV-P10, then plug the other end into the PoE-supplying device.
3. Open the NuVo Player app and go to Settings → Add a NuVo Component. Select "Keypad" as the component type and follow the on-screen instructions to bind the keypad to a zone.

Technical Specifications

Compliance

This device is verified to comply with Part 15, Class B of the FCC Rules.

Manufacturer

Legrand / Nuvo — 860.233.6251, 1.877.BY.LEGRAND. www.legrand.us / www.legrand.ca. © Copyright 2013 Legrand, All Rights Reserved.