Luxul AP-3064 Wi-Fi 6 AX3600 Access Point — Firmware Release Notes

Firmware release notes for the Luxul AP-3064 Wi-Fi 6 AX3600 Dual-Band 4x4 Indoor Access Point — Firmware Version 1.0.15 (recommended update).

Enhancements

• Fixed SSID Scheduling issue.
• Fixed help menu hyperlink.
• Fixed and improved minor UI features.

Known Limitations

• Reboot/Apply timers pause after approximately 30 seconds when on a different browser tab.
• Some information/options on the Wireless clients page were removed erroneously and will be added back in a future release.

Access Point Update Instructions

1. Log in to your access point using its IP address and browse to Advanced >> Update Firmware.
2. Ensure "Update Firmware from" is set to "Auto" and "Firmware Repository" is set to "Release."
3. Click the "Check" button.
4. If a new firmware version is discovered and listed under "Server Firmware Version," click "Update," then click "OK" when prompted to proceed.
5. After a 90-second download and install process, log back into your access point.

Alternatively, download the latest firmware release for your Access Point from the bottom of the product page on LegrandAV.com and choose "a file on your PC" under the "Firmware Location" section of the Update Firmware page.

Firmware Security

As part of Luxul's ongoing commitment to product security, firmware updates support a cryptographic signature. Signed firmware enables the product to verify that the update came from Luxul.

© Copyright 2024 Legrand AV Inc. All rights reserved. Luxul, the Luxul logo, the Luxul logo mark, and Simply Connected are trademarks and/or registered trademarks of Legrand AV Inc.