Leviton 49605-42x — 42-Inch Wireless Structured Media Center Specifications

Product specifications for Leviton's 42-Inch Wireless Structured Media™ Centers (49605-42x series) — enclosures built from RF-transparent ABS polymer to preserve wireless signal range for in-home structured wiring systems.

Application

Structured Media Centers provide an excellent termination and mounting location for in-home structured wiring systems and components. The 42-Inch Wireless Structured Media Center allows the full reach of a wireless network, as opposed to standard metal enclosures that can limit the range of a wireless signal.

Features

• Uses ABS polymer construction to permit the full reach of wireless signals by diminishing the effect of interference
• 180-degree hinged door allows for quick and easy access to network equipment
• Makes servicing and expansion easy with seven 1-inch and three 2-inch knockouts and additional 1-inch nested knockouts
• Compatible with Leviton Connected Home patch panels, voice, data, video, and audio distribution modules
• Assures safety with UL-compliant ABS flame-retardant polymer
• Vented hinged door assists in airflow for cooling active gear
• Ratcheting Hinge & Latch System creates fast, tool-free door installations and helps accommodate for wall imperfections
• Existing metal enclosure can be retrofitted for RF transparency using the Trim Ring Accessory (49605-42T) and door (49605-42S)
• Optional door locks available

Design Considerations

• 42-inch height for added equipment space
• Allows for installation of two single-gang J-boxes or a single full-size power module
• Not intended for installation in a fire-rated wall

Standards Compliance

Meets or exceeds all applicable standards and agency requirements:

• UL Standard 2416 — audio/video, information, and communication technology equipment cabinet, enclosure, and rack systems
• RoHS

Specification

The enclosure shall be molded from UL-rated ABS flame-retardant polymer, suitable for new construction or retrofit installations, and shall allow for flush mounting on standard 16" on-center studs with four wood screws (not provided) or surface mounting on a variety of surfaces capable of supporting the enclosure and contents. The enclosure shall include multiple removable knockouts on the top and bottom to support conduit fittings and facilitate cable routing and entry, and shall accept all Leviton Structured Media panels, modules, brackets, and mounting plates. The enclosure shall allow for installation of two single-gang J-boxes or a full-size Leviton power module.

Vented hinged doors shall be available to promote airflow into the enclosure, opening from the left or right, with toolless door installation. Optional door locks shall be available. An optional trim ring shall be available to cover drywall cut irregularities and to retrofit a plastic vented hinged door to an existing metal enclosure, allowing for greater RF transparency.

Physical Specifications

Part Numbers

Warranty

For a copy of Leviton product warranties, visit www.leviton.com/warranty.

Manufacturer Contact

Leviton Network Solutions
2222 - 222nd St. SE, Bothell, WA 98021-4416
Tel: 1-800-824-3005 / +1-425-486-2222
appeng@leviton.com • www.leviton.com