Leviton 47609-EMP — Telephone Patching Expansion Board Installation Instructions

Installation instructions for the Leviton 47609-EMP Telephone Patching Expansion Board — expands a 4-line T568A telephone distribution system to seven additional locations for use in Leviton Pre-Configured Structured Cabling Panels.

Description

The Telephone Patching Expansion Board is designed to fit easily into Leviton's Pre-Configured Structured Cabling Panels. Working in conjunction with the Category 5e Voice and Data Module, the Telephone Distribution Module, and other Structured Media™ Modules, this product expands the four-line T568A telephone distribution system to seven additional locations. It consists of one 110 D4 connector bridged to seven 8P8C connectors and mounted on a printed circuit board. Incoming telephone service is terminated on the 110 connector, or by patch cord to one of the seven 8P8C connectors.

Installation — To a Pre-Configured Structured Cabling Panel

Structured Cabling Panel without Clips

1. Align the board with an appropriate, empty Pre-Configured Structured Cabling Panel opening (cutout). Ensure the screw holes on the panel opening match the screw holes on the Expansion Board.
2. Using the provided screws, secure the Expansion Board to the panel at alternate corners.

Structured Cabling Panel with Clips

1. Align the Expansion Board with an appropriate, empty Pre-Configured Structured Cabling Panel opening (cutout).
2. Insert the bottom of the Expansion Board into the slot and push the top into the clips. The clips will click and secure the board into place.

110 Wiring Termination

Wire the 110 D4 connector according to T568A standards.

Important Safety Information

• Read and understand all instructions. Follow all warnings and instructions marked on the product.
• Do not use this product near water — e.g., near a tub, wash basin, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.
• Never push objects of any kind into this product through openings, as they may touch dangerous voltages.
• Never install communications wiring or components during a lightning storm.
• Never install communications components in wet locations unless the components are designed specifically for use in wet locations.
• Never touch uninsulated wires or terminals unless the wiring has been disconnected at the network interface.
• Use caution when installing or modifying communications wiring or components.
• To prevent electrical shock, each opening must be filled with a module.
• Save these instructions.

Applications engineering support: 1-425-485-4288 (or 1-800-824-3005 in the USA). Visit www.levitonvoicedata.com for more product info.