Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Jasco 79244 — JascoPro Series Z-Wave Plug-In Smart Switch Specifications

    September 08, 2026 2 min read

    Product specification sheet for the Jasco 79244 JascoPro Series Z-Wave Plug-In Smart Switch, including setup, pairing, and factory reset instructions.

    💾 Download Original PDF
    Full text manual (for reference)

    Overview

    The Jasco 79244 is a JascoPro Series Z-Wave Plug-In Smart Switch — a single Z-Wave controlled outlet for LED, CFL, incandescent lighting, fans, or small appliances. It supports remote ON/OFF operation, manual control via a side push button, mobile monitoring (with a Z-Wave hub), and inclusion in groups/scenes.

    Specifications

    Power 125VAC, 60Hz
    Signal frequency 908.4/916MHz
    Maximum load 1250W (10A) tungsten / 1/2HP motor, or 1875W (15A) resistive
    Classic range Up to 150ft line-of-sight to wireless controller and closest Z-Wave receiver module
    Long range Up to 1,300ft line-of-sight to wireless controller
    Operating temperature 32–104°F (0–40°C)
    Z-Wave module 800 series
    Warranty 5-year limited product warranty
    Dimensions 1.48in x 1.14in x 2.57in
    Use Indoor use only

    Design Features

    • One Z-Wave controlled outlet for LED, CFL, and incandescent lighting, fans, or small appliances
    • Remote ON/OFF operation via a Z-Wave controller
    • Manual ON/OFF control with the side push button
    • Remote monitoring via mobile device (requires Z-Wave hub/controller)
    • Can be included in multiple groups and scenes
    • Supports Z-Wave Long Range and standard Z-Wave, based on hub capabilities
    • Uses the Z-Wave firmware update meta data command class for standardized over-the-air firmware updates
    • Trilingual instruction manual — English, French, Spanish

    Z-Wave Plus Features

    • Works with both Z-Wave Classic and Z-Wave Plus products
    • 50% more wireless range
    • 250% faster processor
    • 400% more memory
    • 50% more energy efficient
    • Supports wireless upgrades to future-proof your home
    • Z-Wave Plus certified

    Device Configuration

    Adding to a Z-Wave network

    1. Follow the instructions for your Z-Wave certified controller to add a device to the network.
    2. Once the controller is ready to add your device, press the program button on the smart switch.

    Once added, you can control the switch's ON/OFF state via groups, scenes, schedules, and automations set up on your controller — and remotely from a mobile device if your controller supports remote access.

    If prompted for the S2 security code, refer to the QR code/security number on the side of the box, or the QR code label on the product itself. Enter the 5-digit code.

    SmartStart: This product can also be added to a Z-Wave network by scanning its QR code with a controller that supports SmartStart inclusion — no further action needed, and the product will join the network automatically within 10 minutes of being powered on within range.

    Removing/resetting the device

    1. Follow the instructions for your Z-Wave certified controller to remove the device from the network.
    2. Once the controller is ready to remove your device, press the program button on the smart switch.

    Returning to factory defaults

    1. If plugged in, unplug the switch from the receptacle.
    2. Press and hold the program button for at least 3 seconds while plugging the switch back into a receptacle.

    Note: Factory reset should only be used if your network's primary controller is missing or otherwise inoperable.

    Related Products

    Also in the JascoPro Series Z-Wave Plug-In Smart Controls line: Model 76724 (Plug-in Smart Switch) and Model 76723 (Plug-in Smart Dimmer).

    Manufacturer

    Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114. Support: 1-833-981-0170, M-F 7AM–8PM Central Time. www.byjasco.com / jascopro.com