Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    ekey home (net) integra — Fingerprint Access Control Assembly Instructions

    August 31, 2026 3 min read

    Assembly instructions for the ekey home (net) integra fingerprint scanner and control panel, covering mounting, wiring, and technical specifications.

    💾 Download Original PDF
    Full text manual (for reference)

    Assembly instructions for the ekey home (net) integra fingerprint access control system, covering delivery contents, mounting, wiring, and technical specifications for the fingerprint scanner and control panel.

    Delivery Contents

    • Fingerprint scanner
    • Control unit
    • Power adaptor
    • 4x dowels S5
    • 2x screws SNK 4.0x35
    • 2x screws LK 2.9x38
    • DIN rail (35mm)
    • Decorative element
    • Assembly instructions

    Mounting the Fingerprint Scanner

    • Mounting height: 155 cm or higher is required. Correct mounting height is essential for reliable, flawless operation.
    • Leave approximately one hand's width of clearance on both sides of the fingerprint scanner for the device to function without interference.
    • A counter-sink cut into the door leaf or door frame is required before mounting the fingerprint scanner and control panel.
    • Mounting options: in a timber door leaf, or in a profile / frontplate / control board installation.

    Control Panel — Wall Mounting

    1. Install the mounting rail (35mm DIN rail) first.
    2. Lock the control panel onto the mounting rail.
    3. The control panel can also be mounted in a control cabinet on a standard 35mm DIN rail.
    4. To access wiring, lift the casing lid's release tab lightly and pull the lid up.

    Electrical Wiring

    • Relay contacts: C = Common, NO = normally open (contact closes when activated), NC = normally closed (contact opens when activated).
    • Channels 2 and 3 are only available on the ekey home 3 and ekey home PC models.
    • RJ45 pin assignment (ekey Fingerscanner integra): Pin 4 = RS485 Terminal 1 (green wire), Pin 5 = RS485 Terminal 2 (yellow wire), Pin 7 = power supply to fingerprint scanner Terminal 3 (brown wire), Pin 8 = power supply to fingerprint scanner Terminal 4 (white wire). Note: cable colors are only valid when using cable Type A from ekey biometric systems.
    • The control panel and fingerprint scanner must be connected with a 4-core cable, core diameter 0.14mm². For distances over 50m, use a cable with a larger core diameter for the live cores (connections 3 and 4). Maximum cable length between the fingerprint scanner and control panel is 500m.
    • Route the connection cable between the control panel and fingerprint scanner separately from the building's electrical installations — these are low-voltage signal lines that can be disrupted by adjacent live cables.
    • An ekey CONVERTER LAN accessory is available for ekey net systems, connecting via RJ45/LAN to a PC.
    • A potential-free contact is provided for controlling door closings, motorized locks, and similar devices.

    Warning: The connections do not have reverse polarity protection — an incorrect electrical connection can damage the device. Electrical connections and mains connection may only be performed by qualified specialists.

    Technical Data — Fingerprint Scanner

    Specification ekey home integra / ekey net integra
    Power supply 8–24 V AC / 8–30 V DC
    Power input approx. 1 W
    Temperature range -25°C to +70°C
    Memory (fingerprints) home: 99; net: 40 / 200 / 2000 (model-dependent)
    Security — FAR 1 × 10⁻⁶
    Security — FRR 1.4 × 10⁻²
    Protection class (front) IP 54
    Speed S 1–4
    Life cycle approx. 10 million fingerprint scans

    Technical Data — Control Panel

    Specification ekey home ekey home 3 / PC / ekey net
    Power supply 9–12 V A/C / D/C 9–12 V A/C / D/C
    Power input approx. 2 W approx. 2 W
    Relays 1 3
    Switching capacity 230V AC / 5A 230V AC / 5A
    Mechanical life span (switching cycles) 10 million 10 million
    Electrical life span of relay 200,000 at 250V/5A 200,000 at 250V/5A
    Temperature range -20°C to +70°C -20°C to +70°C
    Protection class IP 40 IP 40

    Document Notes

    These assembly instructions and the additional documentation on the supplied DVD are subject to optical and technical amendments, plus printing/typing errors — check www.ekey.net for the most current version. Document ID: 27/14: 804121, Version 1, dated 17.6.2011.