Ecovent — Smart Vent, Sensor & Hub Specifications

Technical specifications for the three components of the Ecovent smart HVAC control system: the Smart Vent, the Smart Sensor, and the Smart Hub.

The Ecovent Smart Vent

Replaces standard wall, ceiling, or floor vents with no wiring, ductwork, or calibration required. Automatically opens and closes to direct airflow between rooms, keeping every room at the right temperature.

• Installs easily with just a screwdriver and ladder
• Available in the most popular sizes: 4"x10", 4"x12", 6"x10", and 6"x12"
• Dynamically monitors static pressure — only closes vents to the extent it's safe to do so
• Designed without louvers; smooth sweeping surfaces are quieter than standard vents by up to 10 dB and allow more airflow through open vents, which lets the system safely close more vents elsewhere
• Powered by 4 AA batteries lasting 3-5 years — no electrical work needed
• Magnetized cover for easy battery changes; magnetic trim covers mounting screws after install
• Built-in temperature and pressure sensors
• Operates wirelessly on a secure 915 MHz network

Vent Variants

• Floor vent — holds up to 300 lbs, low-profile design
• Wall vent — pivotable faceplate to direct airflow
• Ceiling vent — designed to optimize air mixing, modeled after a plaque diffuser

Smart Vent Specifications

Approximate exterior dimensions (with faceplate), in inches — width x height x depth: 4"x10" = 11.84 x 5.84 x 2.03; 4"x12" = 13.84 x 5.84 x 2.03; 6"x10" = 11.84 x 7.84 x 2.03; 6"x12" = 13.84 x 7.84 x 2.03.

The Ecovent Smart Sensor

Detects the climate of each room without occupying an outlet — plugs into any wall outlet and monitors temperature, humidity, and pressure. Only one sensor is needed per room. It understands relative altitude within +/- 11 inches and works even if placed behind furniture.

• Also adds 2 USB ports for charging a device or for future sensor expansion

Smart Sensor Specifications

The Ecovent Smart Hub

Deploys the secure 915 MHz network to communicate with smart vents and sensors, and includes Wi-Fi and ZigBee radios plus an Ethernet port to connect to the home network and integrate with other smart devices. It's Ecovent's brain — running the control algorithm and instructing each vent precisely how much to open or close, based on room sensor data and app settings.

• Just one hub per home — can control smart vents in up to 50 rooms
• Works with smart thermostats, including Nest

Smart Hub Specifications