DataComm 45-0023 — Recessed Pro-Power Kit with Straight Blade Inlet Spec Sheet

Spec sheet for DataComm Electronics' 45-0023 Recessed Pro-Power Kit with Straight Blade Inlet — used to route both power and low voltage cables from behind a flat panel TV or A/V equipment to an equipment room.

Overview

The Recessed Pro-Power Cable Kit pairs a Recessed Low Voltage Cable Plate with a Recessed Straight Blade Inlet to install power and low voltage cables from behind a flat panel TV, amplifier, or other audio/video device to the equipment room. It can be installed upright or upside down.

Installation

• Using a National Electrical Code-compliant approved installation, pull an approved 14/2 with ground or 12/2 with ground building wire cable from the installed Recessed Low Voltage Cable Plate with Power to the selected site in the equipment room.
• Install a new or old workbox before installing the Recessed Pro-Power Cable Plate with Straight Blade Inlet.
• This is a non-energized connection. To energize it, plug the supplied 6 ft. straight blade extension cord into the recessed straight blade inlet, then plug the straight blade end of the extension cord into your rack-mounted surge protector.

Kit Contents

45-0021-WH Plate, 45-0023-WH Plate, and 6 Ft. Straight Blade Extension Cord.

Certifications

• U.S. Patent Numbers D553475, D554475, D568719, 11355553 and 7390964; multiple patents pending
• ETL Listed — Conforms to UL STD 514C
• Certified to CAN/CSA STD C22.2 No. 42.1
• The receptacle is a UR/UL Recognized Component

Manufacturer

DataComm Electronics
6349 Peachtree St., Norcross, GA 30071
Phone: 888.223.7977 / 770.662.8205
Website: www.datacommelectronics.com