Menu
0
0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Home  / Product Manuals & Documentation
    Previous  / Next

    Dakota Alert Whistle (DAWHISTLE) — 12V Accessory Wiring Instructions

    September 08, 2026 1 min read

    Wiring instructions for the Dakota Alert DAWHISTLE 12V DC accessory whistle.

    💾 Download Original PDF 🛒 View Product
    Full text manual (for reference)

    Wiring instructions for connecting the Dakota Alert DAWHISTLE — a 12V DC accessory whistle, bell, siren, or strobe that activates when a Dakota Alert sensor signal is received.

    Wiring Instructions

    The red and black leads from the whistle (or bell, siren, strobe, etc.) are for a 12 Volt DC input:

    • Connect the red lead to the (+) terminal of the 12 Volt DC output
    • Connect the black lead to the (−) terminal of the 12 Volt DC output

    The whistle/accessory activates for about 4 seconds when a signal is received. To run the accessory to a remote location, use 2-strand wire between the output and the desired location.

    Manufacturer

    Dakota Alert, Inc. — PO Box 130, 32556 East Main St., Elk Point, SD 57025. Phone: 605-356-2772. Fax: 605-356-3662. www.dakotaalert.com