Channel Vision A0505 — Remote Control Instructions

Instructions for the Channel Vision A0505 Remote Control — a handheld remote for operating Channel Vision's whole-house audio/video systems and iBus® wall docking stations without touching the keypad.

Overview

The A0505 requires no programming and works out of the box with compatible Channel Vision equipment: P-1044, AB-124, A4601, A4603, A4623, AB-313, A0312 and A0314. It provides direct system power, zone power, source selection, mute, volume, and camera controls, plus iBus shuttle control buttons compatible with A0312, A0314, and AB-313 wall docking stations (not compatible with AB-311).

Button Functions

• System Power — turns on/off all zones of the multi-zone audio system
• Zone Power — turns off audio and video for the zone you're currently in
• Source Selection (1–4) — selects audio/video source inputs
• CATV — selects the CATV input on the Affinity
• MOD — selects the modulator input on the Affinity
• Mute — mutes audio; video continues
• Volume Up/Down — adjusts volume for the current zone
• Camera 1–4 — direct-select the corresponding camera input on a P-6014
• Camera Next — advances the monitor output to the next camera in sequence
• Camera Cycle — sequences the monitor output automatically through all cameras (timing set on the P-6014)

Using with Compatible Equipment

A4601 / A4603 / A4623

Point the A0505 at the IR sensor on the bottom of the A0127 and press the desired button — Zone Power turns your current zone on/off; Power is the master power controlling all zones.

P-1044 (via AB-124 keypad)

Point the A0505 at the IR sensor on the bottom of the AB-124. Zone Power turns the P-1044 zone output on/off; Power turns the AB-124 amplified keypad on/off; Source buttons 1–4 light the corresponding LED indicator on the keypad.

P-0321 / P-0328 (Affinity)

Point the remote at an IR receiver connected to the coax-based IR system to switch between CATV and Modulator inputs remotely — the IR signal travels back over the coax to the Affinity unit.

P-6014 Camera Sequencer

Choose any of 4 cameras directly, or select Auto Cycle mode to sequence through all connected CAT5 cameras (up to 4 supported).

iBus Wall Docking Stations

When an iPod is docked in a compatible A0312, A0314, or AB-313 iBus wall station, the A0505's shuttle control buttons (Play/Pause, Skip <<, Skip >>) operate the docked device.

IR Codes (HEX Format)

For programmable/universal remotes that accept raw HEX IR codes:

Warranty

Channel Vision Technology repairs or replaces defects in material or workmanship during normal use, free of charge in the USA, for two years from the date of original purchase — a no-hassle warranty with no mail-in card required. Excludes shipping damage, third-party product failures, and damage from accident, misuse, abuse, or alteration. Extended to the original purchaser only; proof of purchase required for warranty service.

For mail-in service, call (800) 840-0288 toll-free for a Return Authorization number before shipping.

Manufacturer

Channel Vision Technology — 234 Fischer Avenue, Costa Mesa, CA 92626 USA. Phone: (714) 424-6500 / (800) 840-0288. Fax: (714) 424-6510. techsupport@channelvision.com — www.channelvision.com