Channel Vision 6404 / 6204-xxx Mini Pinhole Camera — Instructions

Instruction manual for the Channel Vision 6404 Color Hi-Res WDR Mini Pinhole Camera, and the 6204-xxx Single Gang Color Hi-Res WDR Mini Camera assembly that houses it.

Overview

The 6404 is a high-resolution mini pinhole camera. Its extremely small size and cone-shaped lens make it ideal for hidden and inconspicuous CCTV installations, including door stations, small flush-mount camera assemblies, and hidden camera installations. The 6404 is also used inside the 6204-xxx single-gang color camera assembly.

Features

• High quality 1/3" SONY Super HAD CCD sensor II
• 560 TV lines of resolution
• 5.5mm lens for tight viewing angles
• WDR (Wide Dynamic Range)

Included with the 6404

• Camera
• Camera cable
• Small screws
• Mount
• Power supply

Camera cable wiring: Yellow = Video, Black = GND, Red = 12VDC.

Installation

• Attach the camera mount to a flat surface using the mounting hole.
• Drill a hole in the wall or ceiling, or use the hole in the 6204-xxx bracket for wiring.
• If necessary, attach the camera's video output (BNC connector) to a coax extension long enough to reach your monitor or video distribution equipment.
• If necessary, cut the connector off the end of the power supply and splice in an extension using crimp-on connectors.
• Connect power through a 2-conductor power supply extension (not included) to the included power supply, then to the monitor or video distribution equipment.

Specifications

• Image Sensor: 1/3" SONY Super HAD CCD
• Scanning Frequency: NTSC 15.734KHz (H), 59.94Hz (V)
• Resolution: 560 TV Lines
• Total Pixels: NTSC 811 (H) x 508 (V)
• Effective Pixels: NTSC 768 (H) x 494 (V)
• S/N: More than 52dB
• Min. Illumination: 0.1 Lux@F2.0 (0.0002 Lux)
• Sync System: Internal
• Gamma: Y=0.45
• Video Output: 1.0 Vpp Composite (75 Ohms)
• Lens: 5.5mm P4
• Electronic Shutter: NTSC 1/60 - 1/120,000 sec
• WDR: Yes
• AGC: Off, On (Low, Middle, High)
• Day & Night: Auto, Color, BW selectable
• Motion Detection: Off, On (area select)
• Privacy Masking: Off, On (192-zone selection)
• Languages: English, Chinese
• OSD: Yes
• White Balance: AWB, ATW, AWC-Push, manual
• 3D-DNR: 0-6 setting
• Digital Zoom: x1 - x10
• Digital Effect: Off, V-Flip, Mirror
• Operating Temperature: 14°–122°F
• Humidity: Less than 80%
• Power Consumption: 12VDC max 100mA
• Dimensions: 0.98" x 0.98"
• Weight: Approximately 72g

Specifications subject to change without notice.

Warranty

Channel Vision Technology will repair or replace any defect in material or workmanship occurring during normal use, with new or rebuilt parts, free of charge in the USA, for one year from the date of original purchase — a no-hassle warranty, no mail-in card needed. Does not cover shipping damage, failures caused by third-party products, or failures due to accident, misuse, abuse, or alteration. Extended only to the original purchaser, with proof of purchase required. Mail-in service: call (800) 840-0288 toll free for a Return Authorization number.

Channel Vision products are not intended for use in medical, lifesaving, life-sustaining, or critical environment applications.

Contact

Channel Vision Technology · 234 Fischer Avenue, Costa Mesa, California 92626 USA · (714) 424-6500 · (800) 840-0288 · fax (714) 424-6510 · techsupport@channelvision.com · www.channelvision.com