Bellman & Symfon Alarm Clock Visit (BE1380/BE1580) — Manual

Complete manual for the Bellman & Symfon Alarm Clock Visit — a wireless-connected alarm clock that pairs with the Bellman Visit alerting system for fire, door, telephone, and baby-monitor signals, plus flash light alert.

Overview

The Bellman & Symfon Alarm Clock Visit is the top model in the Alarm Clock line (shared manual also covers the Classic BE1350 and Pro BE1370 models). In addition to standard time/alarm functions, the Visit model (BE1380 at 433.9 MHz, BE1580 at 868.3 MHz, or BE1580-315 at 314.9 MHz) works as a receiver in the Bellman Visit wireless alerting system, and includes a flash light alert for visual notification.

Key Features

• Time and alarm setting (Time/Zeit/Tid/Hora and Alarm buttons)
• Alarm on/off with snooze / beacon function
• Adjustable backlight and selectable time format (12/24-hour)
• Flash light alert for visual notification of Visit system events
• Adjustable sound/chime
• Powered by 4 x AAA NiMH rechargeable batteries
• Pairs with the Bellman Visit wireless alerting system to receive Fire, Baby, Door, and Telephone signals

Pairing with the Bellman Visit System

1. Hold the pairing button for 5 seconds until the unit enters pairing mode.
2. Trigger the transmitter you want to pair (fire alarm, door sensor, telephone ringer signal, or baby monitor).
3. The alarm clock confirms the pairing and will respond to that signal type going forward.

Once paired, the Alarm Clock Visit alerts for: Fire, Baby (baby monitor), Door (doorbell/entry sensor), and Telephone (incoming call signal) — each with its own icon shown on the unit, combined with the flash light alert for maximum visibility.

Connections & Controls

• Power: 4 x AAA NiMH rechargeable batteries, charged via the connector on the back of the unit
• 1-2 Time: sets the current time
• A-B Alarm: sets the alarm time, toggles alarm on/off, and controls snooze/beacon
• Backlight: adjusts display backlight brightness
• Time format: switches between 12-hour and 24-hour display
• Flash: enables the visual flash alert
• Sound: adjusts alarm chime/tone

Regulatory Information

Bellman & Symfon AB declares this Alarm Clock complies with the essential requirements of directives R&TTE 1999/5/EC, LVD 1973/23/EC, EMC 1989/336/EC, and MDD 1993/42/EEC for use in all EU countries.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and complies with Class B digital device limits under Part 15 of the FCC Rules. If interference to radio/TV reception occurs, try reorienting/relocating the receiving antenna, increasing separation between equipment and receiver, connecting the equipment to an outlet on a different circuit, or consulting the dealer/a technician.

Industry Canada: This Class B digital apparatus complies with Canadian ICES-003.

Battery Disposal

Replace batteries only with the same or equivalent type recommended by the manufacturer (4 x AAA NiMH). Dispose of old, defective batteries in an environmentally friendly manner in accordance with relevant local legislation.

Available Models Covered by This Manual

© Bellman & Symfon AB. Bellman, Bellman Visit, and Bellman & Symfon are registered trademarks of Bellman & Symfon AB. All product designs are patented. European Office: Bellman & Symfon Europe AB, Södra Långebergsgatan 30, 421 32 Västra Frölunda, Sweden. www.bellman.com