Bellman & Symfon Alarm Clock Pro (BE1370) — Manual

Complete manual for the Bellman & Symfon Alarm Clock — covering the Classic, Pro, and Visit models, with setup, controls, and connections.

Overview

The Bellman & Symfon Alarm Clock is available in three models — Classic (BE1350), Pro (BE1370), and Visit (BE1380/BE1580/BE1580-315) — sharing a common design with time/alarm setting, backlight, and sound controls. The Pro and Visit models add a flash light alert feature. The Visit model additionally functions as a receiver in the Bellman Visit alerting system, pairing wirelessly to signal events such as fire, door, telephone, and baby-monitor alerts.

Key Features

• Time and alarm setting (Time/Zeit/Tid/Hora and Alarm buttons)
• Alarm on/off with snooze / beacon function (Pro & Visit models)
• Adjustable backlight
• Selectable time format (12/24-hour)
• Flash light alert (Pro & Visit models)
• Adjustable sound/chime
• Powered by 4 x AAA NiMH rechargeable batteries
• Visit model only: pairs with the Bellman Visit wireless alerting system to receive Fire, Baby, Door, and Telephone signals

Connections & Controls

• Power: 4 x AAA NiMH rechargeable batteries (Pro & Visit models use the charging connector shown on the back of the unit)
• 1-2 Time: sets the current time
• A-B Alarm: sets the alarm time, toggles alarm on/off, and controls snooze/beacon (Pro & Visit)
• Backlight: adjusts display backlight brightness
• Time format: switches between 12-hour and 24-hour display
• Flash (Pro & Visit): enables the visual flash alert
• Sound: adjusts alarm chime/tone

Visit Model — Pairing with the Bellman Visit System

The Visit model (BE1380 at 433.9 MHz, BE1580 at 868.3 MHz, or BE1580-315 at 314.9 MHz) connects to the Bellman Visit wireless alerting system, acting as a receiver for household events.

1. To pair, hold the pairing button for 5 seconds until the unit enters pairing mode.
2. Trigger the transmitter (fire alarm, door sensor, telephone ringer signal, or baby monitor) you want to pair.
3. The alarm clock will confirm the pairing and respond to that signal type going forward.

Once paired, the Visit alarm clock alerts for: Fire, Baby (baby monitor), Door (doorbell/entry sensor), and Telephone (incoming call signal) — each shown with its own icon on the unit.

Regulatory Information

Bellman & Symfon AB declares this Alarm Clock complies with the essential requirements of directives R&TTE 1999/5/EC, LVD 1973/23/EC, EMC 1989/336/EC, and MDD 1993/42/EEC for use in all EU countries.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and complies with Class B digital device limits under Part 15 of the FCC Rules, providing reasonable protection against harmful interference in a residential installation. If interference to radio/TV reception occurs, try: reorienting/relocating the receiving antenna, increasing separation between equipment and receiver, connecting the equipment to an outlet on a different circuit, or consulting the dealer/a technician.

Industry Canada: This Class B digital apparatus complies with Canadian ICES-003.

Battery Disposal

Replace batteries only with the same or equivalent type recommended by the manufacturer (4 x AAA NiMH). Dispose of old, defective batteries in an environmentally friendly manner in accordance with relevant local legislation.

Available Models

© Bellman & Symfon AB. Bellman, Bellman Visit, and Bellman & Symfon are registered trademarks of Bellman & Symfon AB. All product designs are patented. European Office: Bellman & Symfon Europe AB, Södra Långebergsgatan 30, 421 32 Västra Frölunda, Sweden. www.bellman.com