Skip to main content
  • Home
  • Seco-Larm Enforcer Xenon Strobe Light, 24VDC

Seco-Larm Enforcer Xenon Strobe Light, 24VDC

SKU: SESL126A24Qx

Please Select Option To View Availability

$26.32 to $29.95

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Details

Stay Safe With Strobe Light Alerts

The Seco-Larm Enforcer Xenon Strobe Light, 24VDC is designed for informative signaling requirements, such as a home security system alert. The light's powerful xenon tube extends flash visibility for enhanced reliability. The strobe light also comes with an inner cover that protects the high-voltage xenon tube when the colored lens has been removed.

  • For informative general signaling
  • Lens is made of high-impact resistant acrylic
  • Low current consumption with long operating lifespan
  • Colored lenses are interchangeable (additional lenses sold separately)

Highly Reliable for Your Protection

If the strobe light is being powered by a backup battery, as the battery is drained, the strobe light will continue to function. Additionally, incorrect polarity cannot damage the circuit or draw current.

Contents

  • Strobe light
  • Mounting screws

Seco-Larm Security Products

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether for physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers such an extensive range of dependable, cost-effective security products with a full program of service and support.

Specifications

  • Circuits: All solid-state
  • Input connections: Red/Positive, Black/Ground
  • Leads: 18 Gauge, 12 inches long
  • Electrical protection: Reverse polarity protected
  • Operating life: over 2,000,000 flashes (300 hours continuous)
  • Environment: -22 to 140 degrees F (-30 to 60 degrees C)
  • Base: High-impact black ABS
  • Lens: High-impact resistant acrylic
  • Flash rate: Over 100 per minute at 24VDC
  • Candle power: 100,00
  • Input voltage: 6 to 24VDC
  • Input current: 150mA ±20 percent at 24VDC
  • Dimensions: 2-26/32 x 3-15/16 inches (74 x 100 mm)
  • Listings: UL

Downloads

»Seco-Larm Enforcer Xenon Strobe Light Installation Manual (.pdf)
»Seco-Larm Enforcer Xenon Strobe Light Spec Sheet (.pdf)