Skip to main content
  • Home
  • Seco-Larm Enforcer HDMI Extender Over Single Cat5e/6

Seco-Larm Enforcer HDMI Extender Over Single Cat5e/6

SKU: SEMVEAH1E101NQ

Order now and we'll ship same business day (if ordered before 3 pm PST).

$72.95

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Details

Use Cat5e/6 Cable To Extend Your HDMI Signal

Take HDMI audio/video signals further with the Seco-Larm Enforcer HDMI Extender over Single Cat5e/6. It uses only one Cat5e/6 cable (not included) to transmit clear HDMI audio/video signals up to 164 feet (50m) from source to display. It comes with both the transmitter and receiver, two power supplies, one IR transmitter, and one IR receiver.

  • Extends HDMI signals up to 164 feet (50m)
  • Supports resolutions from 480i to 1080p with zero signal loss
  • Transmits over a single Cat5e/6 cable
  • Includes IR extender to maintain remote control
  • Status LEDs indicate power and link status

The Seco-Larm HDMI Extender over Single Cat5e/6 supports resolutions from 480i to 1080p with zero signal loss, has an HDMI Loop output for local HDMI display, includes an EDID Management switch, and features an IR Pass-through for remote control extension and operation. This means you can use the IR extender to increase remote control range for the HDMI component whose HDMI signal range you are extending.

Sample Application

Contents

  • HDMI Transmitter
  • HDMI Receiver
  • IR Transmitter
  • IR Receiver
  • (2) 5VDC Power Supplies
  • Manual

Notes

  • To match the display settings to the source device, be sure to use Extended Display Identification Data (EDID) management settings.
  • It may be necessary to move the EDID Switch to a different position if the system is not displaying a correct image.

Building A Secure Future Since 1971

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether it's physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers an extensive range of dependable, cost-effective security products with a full program of service and support.

Specifications

  • Manufacturer Part #: MVE-AH1E1-01NQ
  • Input Video Signal: 3.3V
  • Input DDC Signal: 5Vp-p (TTL)
  • Maximum Single Link Range: 1080p
  • Deep Color: 24bit
  • Video Formats Supported: High-speed HDMI, HDCP 1.2
  • Audio Formats Supported: LPCM, Dolby-AC3, DTS7.1, DSD
  • Output Video: HDMI
  • Resolutions Supported: 1080p/1080i/720p/576p/576i/480p/480i
  • Range – 1080p: Up to 164 feet (50m)
  • Video Amplifier Bandwidth: 4.95Gbps
  • Video Input Connector: HDMI Type A 19-pin female
  • Maximum Input Cable Length: 24AWG (15m), 26AWG (10m), 28AWG (5m)
  • Video Output Connector: HDMI Type A 19-pin female
  • Maximum Output Cable Length: 24AWG (15m), 26AWG (10m), 28AWG (5m)
  • Cat5e/6 Wiring Standard: T-568B
  • IR Pass-Through Frequency: 30~60 kHz
  • Operating Voltage: 5VDC
  • Power Supply: 1A at 5VDC (2 Adapters) (2.1mm plug)
  • ESD Protection (human body model): ±8kV (Air-gap discharge), ±4kV (contact discharge)
  • Current Draw:
    • Transmitter: 300mA at 5VDC
    • Receiver: 200mA at 5VDC
  • Operating Temperature: 32' to 104' F (0' to 40' C)
  • Operating Humidity: 20 to 90% RH (No condensation)
  • Dimensions: 3-1/8 x 11/16 x 2-5/8 inches (79 x 17 x 67 mm)
  • Weight: 5.3 ounces (150g) Each
  • Credentials: FCC, CE RoHS
  • Warranty: 1 Year

Downloads

»Seco-Larm MVE-AH1E1-01NQ Enforcer HDMI Extender over Single Cat5e/6 Spec Sheet (.pdf)
»Seco-Larm MVE-AH1E1-01NQ Enforcer HDMI Extender Over Single Cat5e/6 Installation Manual (.pdf)