• Home
  • Seco-Larm Enforcer Glass-Break Detector

Seco-Larm Enforcer Glass-Break Detector

SKU: SEENFORCER190

Usually ships in 3-5 days.

$30.95

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Details

Detect When A Glass Window Breaks

Know exactly when an intruder breaks a window in your home by installing the Seco-Larm Enforcer Glass-Break Detector. This compact, glass break detector detects high frequency sound of glass breaking, which means you don't have to add individual detectors on each window of your home. Just make sure your windows are within 25 feet of the detector when it's mounted on a ceiling or within 34 feet of it when it's mounted on a wall. This detector is equipped with an N.C. tamper circuit for protection against opening or breaking of its case, and it features status LEDs: yellow for environmental noise level and red for trigger signal sent to the alarm. It also has a compact size that makes it ideal for discreet installations.

  • Detects the high-frequency sound of breaking glass
  • Wide detection radius: 25ft when ceiling-mounted, 34ft when wall-mounted
  • N.C. tamper circuit protects against breaking or opening of its case
  • Red LED indicates signal sent to alarm and yellow LED for environmental noise level
  • Compact size allows for discreet installations

Contents

  • Glass-Break Detector
  • Manual

Seco-Larm Security Products

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether for physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers such an extensive range of dependable, cost-effective security products with a full program of service and support.

Specifications

  • Manufacturer Part #: ENFORCER 190
  • UPC: 676544001058
  • Operating Voltage: 12VDC (7.5 to 15 VDC)
  • Current Draw: Standby- 5mA, Triggered- 80mA
  • Detector Output: 2A Dry relay NO/NC/COM
  • Tamper Output: N.C. Contact
  • Status LEDs:
    • Yellow- Environmental noise level
    • Red- Trigger signal sent to alarm
  • Operating Temperature: 14 to 122° F (-10 to 50° C)
  • Material: ABS Plastic
  • Dimensions: 4-1/2 x 2-3/4 x 1-1/8 inches (115 x 70 x 27 mm)
  • Weight: 3.35-oz (95g)
  • Credentials: CE

Downloads