• Home
  • Seco-Larm Enforcer Access Control Keypad, Outdoor, Surface Mount

Seco-Larm Enforcer Access Control Keypad, Outdoor, Surface Mount


Order now and we'll ship same business day (if ordered before 3 pm PST).


WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Outdoor Keypad With Simple Access Control

Enter your home or office with simple access control by using the Seco-Larm Enforcer Access Control Surface Mount Keypad. This outdoor keypad is not only extremely durable, but also attractive due to its stainless steel faceplate. It can be programmed with up to 1,100 possible user codes and up to 50 possible temporary guest codes. It features a keypad that illuminates when a button is pressed and the backlight can be set to FULL, AUTO, or OFF in standby mode. The keypad features two Form C relay outputs (1A at 30VDC) – one supports 1000 users while the other supports 100 users – both can be programmed to activate for up to 99,999 seconds (nearly 28 hours). User codes can be 4-8 digits long and guest codes can be programmed for one-time or limited-time use. The keypad mounts to a standard, single-gang back box and can be programmed easily and directly from the keypad itself – no need for an external programmer. Plus, the keypad's programmable delayed egress input allows users to exit without entering a code.

  • 12-button outdoor keypad that illuminates when pressed
  • Supports up to 1,000 possible user codes (000~999) for Output 1 and 100 user codes (001~100) for Output 2
  • Supports up to 50 (01~50) temporary guest codes (1~99 hours), which can be programed for one time or limited time use
  • Duress code is signaled if an authorized user is forced to open the door under duress
  • For a protected area with two doors, the mantrap feature allows only one door to be opened at a time
  • Super user code gives admin access to keypad
  • 24-hour real time clock provides the baseline time needed to start and stop the Output 1 Auto-Disable Time
  • Up to 50 (01~50) duress codes for Output 1 and up to 10 (01~10) for Output 2
  • Keypad can be programmed to beep if door left propped open or forced open
  • Interlocking input for connecting to a second keypad
  • EEPROM memory will store programmed information if there's power loss
  • IP66 weatherproof rating (protects against dust and water)

Installation and Power Details

The keypad supports 12~24V AC/DC universal power, eliminating the need for special programming or jumpers. It wires into a power supply (sold separately) and mounts to the wall with the included screws and back box. In case of a power outage, all your data is stored and reliably retained in the keypad's non-volatile EEPROM memory.


  • Keypad
  • Back Box
  • (2) Installation Screws
  • (3) Mounting Screws
  • (3) Mounting Screw Anchors
  • Security Wrench
  • Diode
  • Manual

Building A Secure Future Since 1971

So many places and things to protect; so many ways to protect them; one partner: Seco-Larm. Under the Enforcer trademark, Home Controls offers an impressive line of Seco-Larm security products, ranging from simple switches to some of the most sophisticated alarm devices. Whether it's physical security, CCTV, access control, RF equipment, or vehicle security, Seco-Larm is the premier choice. Seco-Larm gives its customers an extensive range of dependable, cost-effective security products with a full program of service and support.


  • Manufacturer Part #: SK-1123-SDQ
  • Operating Voltage: 12~24 VDC/VAC
  • Current Draw (at 12VDC):
    • Standby: 66mA
    • Keypress: 93mA
    • Output 1 active: 99mA
    • Output 1 & 2 active: 126mA
    • Total Max. Current Draw: 160mA
  • Outputs:
    • #1 – Form C: 1A at 30VDC
    • #2 – Form C: 1A at 30VDC
    • Key Active: 100mA at 24VDC
    • Duress: 100mA at 24VDC
    • Interlock: 100mA at 24VDC
    • Tamper: N.C. Dry Contact: 50mA at 24VDC max.
  • Inputs:
    • Egress: N.O. Ground
    • Door Sensor: N.O. Ground
    • Door Inhibit: N.O. Ground
  • Operating Temperature: -4° to 158°F (-20° to 70°C)
  • Operating Humidity: 5 to 95 percent non-condensing
  • IP Rating: IP66
  • Dimensions (including back box): 4-15/16 x 3-1/8 x 2-1/16 inches (125 x 79 x 52 mm)
  • Weight: 1 pound, 2 ounces (520g)
  • Warranty: Limited Warranty