Napco Gemini LCD Keypad with Built-In RF Receiver
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Details
Built-In Receiver Supports All Gemini Transmitters
Save space, time and money with the Napco Gemini LCD Keypad with Built-In RF Receiver. The integral Gemini receiver inside the keypad supports up to 32 wireless points, allowing remote control of connected sensors, smoke detectors, alarms, and other connected devices with a wireless transmitter. No need for a separate receiver! The built-in receiver even monitors each transmitter to help ensure reliability. This keypad is the perfect control solution for your new Napco security system.
- Built-in 32 point Gemini wireless receiver
- Supports all Gemini transmitters
- Stay and away ease-of-use buttons
- Built-in fingertip end user reference chart
Convenient Quick-Use Keys
As part of Napco’s K Series line of keypads, the GEM-K4RF Keypad features quick and easy to use "stay and away" keys, which provide convenient system arming for both day (away) and night (stay) modes. Each of the large soft-touch backlit keys includes a programmable touch-tone feature to provide audible feedback with a button is pressed. The keypad also offers three programmable keypad panic keys (F, P, A) for fire, police or an auxiliary device.
Simple Programming and Monitoring
This multi-segment LCD digital keypad is compatible with the NAPCO GEM-Series GEM-P816, P1632, P3200 and P9600 control panels. With EZ Keypad Programming, you can easily configure the keypad to work with your panel.
The receiver is connected to the control panel’s 4-wire bus through the same four wires as the keypad. The receiver monitors each transmitter, updating transmitter status as reports are received, and conveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, a Supervisory Failure will result.
Note: Do not mix classic "RP series" keypads with "K Series" keypads within one system.
Built By Security Professionals For Security Professionals
The Napco Security Group is a leading diversified manufacturer of security products, encompassing burglar and fire alarms, access control systems, video and electronic digital and proximity locks, as well as panic exit hardware. Sold and installed by tens-of-thousands of security professionals, from security dealers to locksmiths to systems integrators, millions of homes, businesses, institutions and people around the globe are protected by products from the Napco Group of Companies.
Specifications
- Compatible Control Panels: NAPCO GEM-Series GEM-P816, P1632, P3200 and P9600
- Operating Voltage: 12VDC (supplied by panel)
- Current Drain: 75 mA Standby
- Operating Temperature: 0 to 49 degrees C
- Storage Temperature: 20 to 85 degrees C
- Power Requirements: 12VDC, 75mA (supplied by panel)
- Antenna: 1/4-wave (external wire), and internal antennas
- Dimensions: 5-7/8(W) x 4-3/8(H) x 1(D) inches