Lithe Audio Pro Series Wi-Fi and Bluetooth IP44 Bathroom Ceiling Speaker (Pair)

Install A Speaker, Amplifier, and Receiver Into One Location

Add an all-in-one wireless ceiling speaker anywhere within your home audio entertainment system with the Lithe Audio Pro Series Wi-Fi and Bluetooth IP44 Bathroom Ceiling Speaker (Pair). This kit includes a Lithe Audio Pro Series Wi-Fi and Bluetooth IP44 Bathroom Ceiling Speaker and a 6.5" Passive Ceiling Speaker.

The Pro Series Wi-Fi and Bluetooth IP44 Bathroom Ceiling Speaker features a built-in amplifier and Wi-Fi receiver so you can enjoy high resolution audio anywhere in your home for multi-channel or whole home audio setups. The Pro Series Speaker is water resistant with an IP44 rating, allowing for installation of the speaker within bathrooms or other high humidity rooms. Its built-in 60W RMS Class D amplifier, polypropylene cone, and titanium tweeter can deliver audio at 192 KHz at 24 bits, allowing the speaker to emit the highest possible quality from any connected source. The Pro Series Wi-Fi Ceiling Speaker supports wireless input via Wi-Fi and Bluetooth, as well as wired connections via Ethernet, optical, or passive speaker gauge wire. The speaker is fully certified with Apple AirPlay 2, Google Chromecast, and Spotify Connect for wireless audio streaming of popular sources such as Spotify, Pandora, Napster, Deezer, Tidal, Amazon Music, and more! The Passive Speaker features the same audio construction as the Pro Series speaker, without the built-in amplifier, Wi-Fi receiver, or IP44 water resistance rating.

• Master single speaker with built-in 60W RMS Class D amplifier and Wi-Fi receiver for all-in-one premium audio solution, plus passive 6.5" ceiling speaker
• 2.4GHz and 5GHz Wi-Fi and Bluetooth connectivity enables wireless streaming from paired devices, plus wired input connection via Ethernet and optical
• IP44 water resistance lets you bring your music into your bathroom, no more acapella karaoke
• Apple AirPlay 2, Google Chromecast, and Spotify Connect certified
• Scalable with audio configurations between 2.0 to 7.1 Channels with Lithe Audio and third-party speakers
• Woven glass fiber cone and titanium cone produce high quality audio and pin sharp clarity
• Setup, pair devices and audio zones and adjust settings via the Lithe Audio mobile app for Android or iOS devices
• Optional WiSA compatibility for Dolby Atmos support, WiSA module (06521) sold separately
• Supports Control4, Elan, KNX, FIBARO & Loxone Drivers
• Integrates into smart home systems and is controllable with 3rd party remotes including AVA, ELAN, and more
• Voice control compatibility with Amazon Alexa and Google Assistant

Lithe Audio and ELAN Smart Home Integration

Lithe Audio Pro Series and Wi-Fi Active ceiling speakers are compatible with the Nice/ELAN smart home platform. This FREE driver software enables Lithe Audio Pro Series Speakers and Indoor Wi-Fi Ceiling Speakers (iO1 series not supported) to be controlled by an ELAN smart home system. This breakthrough integration brings every feature of Lithe Audio Wi-Fi speakers into ELAN smart home systems, enhancing the already premium smart home platform with superior audio quality and performance. Up to 5 pairs of Lithe Audio Wi-Fi speakers can be integrated into an ELAN system.
The driver supports the ability to browse between connected streaming sources from your ELAN controllers or mobile app. This driver also embeds chimes, tones and emergency alert sounds directly within the internal memory of the Pro Series speakers to deliver audio alerts across the ELAN system, even without any internet connection. By embedding chimes and sounds in the internal memory of the speakers, latency and timeouts are virtually eliminated within local networks that incorporate multimedia audio setups and home security or automated alerts into one system. For example, a pair of speakers in the kitchen or in multiple rooms can emit a doorbell announcement, or be used to signal a triggered automation or security function. Click the link here to download the driver from Lithe Audio.

Installation Details

The Pro Series Bluetooth & Wi-Fi Ceiling Speaker fits into ceilings with included mounting hardware and uses lighting circuits as its primary power supply out of the box. Simply cut holes in the desired locations in your ceiling, connect the speaker to the included Power Driver and your existing lighting circuit, and secure the speaker. If installing the Pro Series speaker in a bathroom or other high humidity room, do not install directly over a shower or bathtub.

The Pro Series Ceiling Speaker also supports Power over Ethernet (PoE) connection through the Lithe Audio PoE Adaptor Module (sold separately). The speaker is configured from the Lithe Audio app, from where you connect the speaker to your Wi-Fi network, adjust settings, and connect other Lithe Audio speakers into audio zones. Once initial setup is complete, the speakers can also be selected via Google Home, or Apple Airplay, or Chromecast compatible sources.

The Passive Speaker can be powered via the Right speaker output regardless of the Master Speaker's power supply. The Passive Speaker mounts into your ceiling with included hardware.

Lithe Audio App

The Lithe Audio app for iOS and Android devices lets you effortlessly control the music throughout your home from a single interface. It's simple and easy to set up thanks to automatic detection of all Wi-Fi speakers that are connected to your network. Easily drag and drop rooms into groups to play the same music in multiple spaces, or keep rooms separate to enjoy different music in each area simultaneously. You can fully personalize your zones, allowing speakers to be independently renamed, switched between Left and Right speaker output, and volume controlled.

Contents

• Pro Series Bluetooth & Wi-Fi Ceiling Speaker
• Passive Ceiling Speaker
• 5M Speaker Cable
• Power Driver
• Cutting Template
• Instruction Manual

Notes

• No additional amplifiers, audio switches or matrices, controllers, or routers necessary.
• (KNX compatibility requires the APPMODULE KNX module supplied by BAB Technology, not available at HCI)
• For larger homes where Wi-Fi signals from a single router are not stable, using wireless access points or mesh routers to strengthen the network is recommended.
• Do not install directly over a shower or bathtub.
• Hard wired ethernet connection can also minimize signal loss.
  

Innovative Audio Products

As an innovative audio company based in the United Kingdom, Lithe Audio specializes in wireless audio technologies for the residential and hospitality markets. They offer an extensive selection of active ceiling speakers, each designed with cutting-edge innovation. Their expertise lies in Wi-Fi and Bluetooth technologies, seamlessly integrating with leading smart home brands like Apple, Amazon, Google, and Control4. This enables customers around the world to fully embrace the evolving audio landscape of today and the future.

• Manufacturer Part #: 06511
• EAN: 5060544555058

Lithe Audio Pro Series Wi-Fi Ceiling Speaker, Single Master (06500)

• Network Connection: Wi-Fi certified 2.4Ghz / 5Ghz (802.11a/b/g/n/ac)
• Connectivity:
• Wi-Fi Certified (2.4Ghz or 5Ghz)
• Bluetooth
• Ethernet Connection In / Out
• Optical
• DLNA/uPnP connections
• Apple AirPlay 2 certified
• Google Chromecast certified
• Spotify Connect certified
• WiSA with optional bolt-on module (06521 sold separately)
• Recommended Routers:
• Archer MR600 (TP-Link)
• UDM (Ubiquiti)
• 2866AC-K (Draytek)
• Woofer: 6.5" Polypropylene Cone
• Tweeter: 0.75" Titanium Cone
• Switch: Mono/Stereo
• RMS Power: 60W RMS (2 x 30W)
• Impedance: 8 Ohms nominal
• Sound Quality: THD+N 0.009%, 55Hz-20kHZ (± 3dB)
• Sensitivity (1W/1m): 90dB
• Audio Compression: 192Khz/24bits
• Amplifier: Class D (Digital)
• Line In (Optical): Auto detection
• Cut-Out Diameter: 210mm
• Power Input Supply: 100 – 240V, 50/60Hz / 2A
• Transformer Output Supply: DC24V / 2.5A
• Standby Power: 1.3W / 0.02A
• Connected Power: 1.5W / 0.03A
• Playing Music: 2.8W – 10.5W / 0.03A – 0.09A
• Dimensions: 9.05 W x 4.33 D inches (230 W x 110 D mm)
• Operating Temperature: 32 – 104°F (0 to 40°C)
• Storage Temperature: -4 – 158°F (-20 to 70°C)
• Weight: 3.7kg
• Warranty: 2-Year Limited

Lithe Audio 6.5" 2-way Passive Slave Ceiling Speaker, Single (01556)

• Woofer: 6.5" Woven Glass Fiber Cone
• Tweeter: 0.75" Titanium Cone
• Switch: Mono/Stereo
• Impedance: 8 Ohms
• Sound Quality: THD+N 0.009%, 55Hz-20kHZ
• Sensitivity (1W/1m): 90dB
• Audio Sample Rate: 8Khz
• Cut-Out Diameter: 210mm
• Weight: 3.7kg
• Dimensions: 9.05 W x 3.88 D inches (230 W x 97 D mm)
• Warranty: 2-Year Limited

»Lithe Audio Pro Series Wi-Fi Ceiling Speaker Spec Sheet (.pdf)
»Lithe Audio Pro Series Ceiling Speaker Installation Manual (.pdf)
»Lithe Audio Speaker Technical Drawing (.pdf)