Skip to main content
  • Home
  • Linear Multi-Code Gate Receiver, 12-24V

Linear Multi-Code Gate Receiver, 12-24V

SKU: LN109302x

Please Select Option To View Availability

$59.95 to $72.60

WARNING: Cancer and Reproductive Harm –


Compatible With Multi-Code & Stanley Transmitters

The Linear 12-24V Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver’s Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.

The Receiver is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.

The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator’s radio activation terminals.

The receiver is programmed with a coding switch. When a transmitter set to the same code is activated, the receiver’s output will activate, triggering the gate operator.

Available In 1-Channel and 2-Channel

This Gate Receiver is compatible with Multi-Code and Stanley transmitters only.

Radio Controls For Every Requirement From Linear

From garage door openers to gate operators, from loading dock doors to access control systems, from everyday entry to high security, Linear makes radio controls to cover the industry’s diverse range of applications. Single and multi-channel transmitters and receivers can be mixed and matched within product families to address just about any user need.


  • Operates on 12-24 volts AC or DC power
  • One or Two Channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • 1,024 codes
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
  • 3.625" W x 5.25" H x 1.5" D