ELK 2-Way Wireless Sound All Heat Detector

Designed With Fixed & Rapid "Rate-Of-Rise" Temperature Detection

Receive alerts when heat is detected due to a possible fire on your property with the Elk 2-Way Wireless Sound All Heat Detector. This heat detector easily integrates into your Elk home system by wirelessly connecting to an Elk M1 controller (requires two-way wireless transceiver, ELK-M1XRFTWM). This detector also provides fixed temperature heat detection (135°F) and rapid "rate-of-rise" temperature detection. It also features built-in self diagnostics to monitor its operation and sensitivity status.

• Detects heat and has a built-in sounder
• Works with the Elk Transceiver and ELK-M1 Controller (both sold separately)
• Includes fixed and rate-of-rise temperature detection
• One detector activates all detectors in system
• Built-in self diagnostics monitors operation status

The Elk 2-Way Wireless Sound All Heat Detector is designed for reliable performance and is ideal for residential installations. When installed with additional ELK-6053 heat detectors and ELK-6052 smoke detectors, it can wirelessly activate the built-in sounders of all sensors during an alarm (additional sensors sold separately). This will ensure everyone at home is properly alerted when heat is detected due to a possible fire.

Reliable Wireless Communication

The Elk Wireless Heat Detector works with the Elk Two-Way Wireless Transceiver (part ELK-M1XRFTWM) to send and receive wireless signals to/from the Elk M1 controller. Two-way technology allows the system to continually monitor and adjust RF signals, delivering reliable wireless communication and extended battery life.

Contents

• Sound All Heat Detector
• (2) Replaceable 3V Lithium battery
• (2) Plastic Anchors
• (2) #6 Pan Head Sheet Metal Screws
• Instructions

NOTE: Requires the Elk Two-Way Wireless Transceiver (part: ELK-M1XRFTWM) and Elk M1 Controller (both sold separately).

Premium Products For Security & Automation

Elk Products designs and manufactures quality electronic equipment for the professional security alarm and home automation installer. Our products include siren drivers, speakers, relays, timers, programmable controls, surge suppressors, telephone equipment, amplifiers, recordable units, batteries and more.

• Manufacturer Part #: ELK-6053
• Panel Compatibility: ELK-M1 Control with ELK-M1XRFTWM Two-Way Wireless Receiver for interconnection (both sold separately)
• Audible Sounder: >85dB(A) at 3m (10ft) minimum
• RF Frequency: 900MHz Two-way
• Current Drain: Typical 9µA Standby
• Standby Current: 85mA
• Test/Silence Button: Test horn & silences Detector for 10 min
• Power: 3V CR123A Lithium Battery (replaceable)
• Operating Temperature: 40°F to 100°F (4.4°C to 37.8°C)
• Humidity Range: 15% to 95% R.H. (non-condensing)
• Dimensions: 4.7 x 1.8 inches (120 x 46mm)
• Weight: 0.46 lbs (210g)
• Credentials: FCC

»ELK-6053 Heat Detector Installation Manual (.pdf)